How to Make a Concrete Urn Planter: Step-by-Step Guide
Elevate your gardening game with a stylish and durable concrete urn planter! Whether you're aiming to add a touch of classic beauty to your porch, patio, or outdoors, a concrete planter is the perfect choice. Not only is it eco-friendly, but it's also incredibly versatile and long-lasting. Here's a step-by-step guide to create your own stunning concrete urn planter.
Before you begin, make sure you have all the necessary materials and tools. Depending on your preferred design, you might need items such as concrete mix, waterproof sealant, colored concrete powder, plastic liner, or additives for texture. Gather your tools, including a mixing bucket, trowel, gloves, drum sander or orbitals, sandpaper, mold (like an urn-shaped cake pan), and safety gear like goggles and a dust mask.
Creating Your Concrete Mix
Start with a high-quality concrete mix designed for outdoor use. You can also opt for a lightweight or fast-setting mix based on your project's requirements. For larger urns, consider adding fiber reinforcement for increased strength. Always follow the manufacturer's mixing instructions for the best results.



To create colored concrete, add a bag or two of powdered pigments to your mix. Keep in mind that darker colors may require additional amounts of pigment. For a textured finish, you can also use pea-sized aggregates or pebbles. These not only enhance the visual appeal but also improve the planter's strength.
Molding Your Concrete Urn
Choose a suitable mold for your desired urn shape. Grease the mold to ensure an easy release once the concrete has cured. If using a cake pan mold, seal the bottom with plastic wrap or tape to prevent the concrete from leaking through.



Pour your prepared concrete mix into the mold, filling it to the brim. Ensure the mixture reaches every corner, using your trowel to press down firmly. For an even surface, level the top with a straight edge. Allow the concrete to set for the recommended time, typically 24-48 hours.
Adding The Plastic Liner
Once your concrete urn planter is set, carefully remove it from the mold and smooth any rough edges using sandpaper or a drum sander. If desired, apply a waterproof sealant to protect your planter from moisture and elements. Allow the sealant to dry completely following the manufacturer's instructions.
Insert a plastic liner into the urn to prevent water from seeping into the concrete. This will protect your planter and make it easier to maintain. You can trim the liner to size or use a pre-made liner specifically designed for urn planters.





Finishing Touches
Adding drainage holes is essential to keep your plants healthy and prevent waterlogging. Use a drill or masonry bit to create holes at the bottom of the urn and along its sides. Ensure the holes are slightly smaller than the plant pot's drainage holes for optimal water flow.
Finally, let your creativity shine by decorating the exterior of your concrete urn planter. You can paint it with exterior-friendly acrylic paint, apply a Congoleum surface treatment, or even embed decorative elements like glass or stones during the molding process.
Caring For Your Concrete Urn Planter
Maintaining your concrete urn planter is straightforward. Starting with the first watering, ensure your plants have sufficient drainage to avoid waterlogging. Periodically check for any cracks or signs of damage and address them promptly to preserve your planter's longevity.
When winter approaches, take precautions to protect your concrete planter from freezing temperatures. Move it indoors if possible, or insulate it by wrapping burlap around the urn and securing it with twine. Not only will these steps extend the life of your planter, but they'll also help maintain its beauty for seasons to come.
Embracing the natural beauty of concrete, a homemade urn planter adds an unparalleled charm to any outdoor space. So go ahead, dust off your gloves, and get ready to create a stunning centerpiece for your garden or porch. Happy crafting!





