how to make a bathtub access panel

How to Make a Bathtub Access Panel

By William Harris
AD

Claustrophobic to access your tub's plumbing? An access panel can save your day. Here's a step-by-step guide to create one, ensuring safety, functionality, and aesthetic appeal.

Creating a bathtub access panel is an essential project for homeowners aiming to maintain their tub's plumbing safely and efficiently. This guide will walk you through the process, from planning to execution, ensuring you have all the information you need to tackle this task.

Planning Your Access Panel

Before you start, plan your access panel wisely. Consider the size, shape, and location to ensure accessibility and meld with your bathroom's aesthetics. Standard panel sizes range from 8" x 8" to 12" x 18".

AD
Part 8: How to Make a Bath Access Panel
Part 8: How to Make a Bath Access Panel
Create a concealed tub access panel in tile
Create a concealed tub access panel in tile
Create a concealed tub access panel in tile
Create a concealed tub access panel in tile

Sketch your panel design on paper or use digital tools for a more precise layout. Mark the panel's dimensions, its position relative to the tub, and any serpentine paths around pipes or obstructions.

Gather Tools and Materials

With your plan in hand, gather the necessary tools and materials. You'll need:

15 DIY Bath Panel Ideas to Upgrade Your Bathroom
15 DIY Bath Panel Ideas to Upgrade Your Bathroom
the steps to make a diy wood door
the steps to make a diy wood door
a close up of a sink under a window
a close up of a sink under a window
  • Tape measure
  • Pencil
  • Saw (jigsaw recommended)
  • Hammer or drill with bits (for pilot holes)
  • Screwdriver or drill (for screws)
  • Nails or screws (1" to 2" length)
  • Hinges (butt or specialized tub hardware)
  • Latch or magnetic catch
  • Wood or plywood (according to your panel size)

Create the Access Panel

Using your chosen material, cut out the access panel according to your planned dimensions. A jigsaw is an excellent tool for clean, curved cuts if your panel isn't a simple rectangle.

Test-fit the panel in the planned location. If it's a perfect fit, mark where it meets the tub's surface and set it aside. If not, adjust and recut as necessary.

AD

Installing the Access Panel

Once your panel is perfect, it's time to install it. Ensure you're working safely by plugging tub drain and turning off power to nearby outlets as a precaution.

MagnaPanel Installation Procedure
MagnaPanel Installation Procedure
How to Build a Concealed Access Panel
How to Build a Concealed Access Panel
DIY Tub Skirt (Decorative Side Panel) For A Standard Apron-Side Soaking Tub
DIY Tub Skirt (Decorative Side Panel) For A Standard Apron-Side Soaking Tub
Make Your Own Bath Panel
Make Your Own Bath Panel
a bathroom with checkered walls and tile flooring, including a bathtub that has the words diy custom bath panel from an ikea wardrobe door
a bathroom with checkered walls and tile flooring, including a bathtub that has the words diy custom bath panel from an ikea wardrobe door
How to built a drop-in-tub surround with full access
How to built a drop-in-tub surround with full access

Mark the panel's size on the wall or tub surround using the measurements made during the test-fit. Trace the outline, then use a pencil or marker to mark hinge and latch positions within that outline.

Installing Hinges

Choose hinges designed for tub access panels or traditional butt hinges. Mark and drill pilot holes (if required) for the hinges' screw mounting points. Alignment is crucial, so gauge the hinge placementeach side before securing the top hinge.

AD

Secure the hinges using screws, ensuring they're tight but not over-tightened. The panel should swing open and shut smoothly with a firm, secure feel.

the bathroom is decorated in black and white tiles with gold trimmings, including an area for a dog to sit on
the bathroom is decorated in black and white tiles with gold trimmings, including an area for a dog to sit on

Installing the Latch

With hinges installed, attach a magnetic catch or latch mechanism to keep the panel closed. Mark and drill pilot holes (if needed) for the latch mounting points. Once again, align components carefully before securing.

Install the latch on the panel's edge, ensuring it properly engages with the catch when the panel is closed.

AD

Stand back and admire your new tub access panel. By following this guide, you've added functionality and safety to your bathroom while maintaining its aesthetic. Regular maintenance check-ups are now easier than ever, ensuring years of peace of mind.

AD