"Level That Pool Table: Easy Tips for Uneven Floors"
Pool tables are precision engineered to ensure the perfect roll, but an uneven surface can throw performance off, leading to frustating games and potential damage. If your pool table has started playing like it's on a trampoline, it might be time to level it. Uneven floors can cause the table to sit at an angle, affecting play. Here's how you can level a pool table on an uneven floor.
Before you start, gather some tools. You'll need a level, a tape measure, masking tape, and some leveling shims or wedges. Pool tables can be heavy, so enlist a friend or two to help with the lifting. Always prioritize safety when moving heavy objects.
Safety and Preparation
The first step is safety. Pool tables can be quite heavy, so make sure to lift with your knees, not your back. It's also a good idea to cover the table's surface with masking tape to prevent scratches.



Before you start leveling, check the table's leveling mechanisms. Most pool tables have adjustable feet or leg levelers. Make sure these are functioning properly. If the feet are rusted or stuck, you may need to replace them or sand them down before leveling.
.use the Level Indicator
Most pool tables have a built-in level indicator, usually a bubble level on the inside rail of the table. Use this to get an initial reading of how level your table is. If the bubble isn't in the middle, your table is sloping.



If your table doesn't have a built-in level, you can use a regular level on the table's surface. Place it in the middle of the table, parallel to the longest side. If the bubble isn't in the middle, your table is sloping.
Mark the Uneven Spots
Using a tape measure, mark the height of each leg on the floor. This will give you a visual reference for how much each leg needs to be adjusted.
Next, mark the high and low spots on your table. These are the areas where your level reading showed that the table was sloping. These will be the spots where you need to add or remove shims.



![How to Move a Pool Table Across the Room? [Without Any Help]](https://i.pinimg.com/736x/9d/8b/25/9d8b257d6079b372fb7be5a70f8caf3c.jpg)


Adding or Removing Shims
If your table is sloping downwards, you'll need to add shims under the low spots. If it's sloping upwards, you'll need to remove shims from the high spots.
Most pool tables have shims pre-installed at the base of each leg. These can be removed or added to level the table. If your table doesn't have shims, you can purchase them from a pool table supply website or a local hardware store.
Adding Shims
If your table is sloping downwards, you'll need to add shims under the low spots. Use the heights you marked earlier to determine how many shims you need to add. Start with one shim and incrementally add more until the table is level.

Place the shim under the leg and try to distribute it as evenly as possible. Use a level to check if the table is level after each shim addition. Be patient, as this process can take some time.
Removing Shims
If your table is sloping upwards, you'll need to remove shims from the high spots. Use the heights you marked earlier to determine how many shims you need to remove. Start with one shim and check the level after each removal.
When removing shims, make sure to leave at least one shim under each leg to provide stability. If you remove all the shims and the table is still not level, you may need to adjust the feet or replace them.
Once your table is level, double-check all the legs to ensure they are the same height. Then, step back and enjoy your perfectly leveled pool table. Regularly check the level to ensure it stays that way, especially if your home experiences temperature changes that can cause flooring to expand or contract.




