Step-by-Step: Install Schluter Shower Pan Kit
Installing a Schluter shower pan kit can significantly enhance your shower's waterproofing and durability. These kits, often used in tile shower installations, provide a seamless, watertight barrier to prevent leaks. Here's a comprehensive guide on how to install a Schluter shower pan kit professionally and efficiently.
Before delving into the installation process, ensure you have the right kit. Schluter offers various kits, each catering to different shower pan sizes and requirements. This guide assumes you're using the Schluter KERDI-BOARD shower pan kit.
Gathering Tools and Materials
The installation process requires specific tools and materials to ensure a successful outcome:



- Schluter KERDI-BOARD shower pan kit
- Taping knife
- Notched trowel
- Cement-based thinset mortar or Schluter's KERDI-FIX adhesive
- Measuring tape
- Circular saw
- utility knife
- Screwdriver or drill (for거 KERDI-DRAIN installation)
Preparing the Shower Area
Begin by preparing the shower area. This involves removing any old materials, ensuring the substrate is clean, and making any necessary adjustments to the shower base to accommodate the Schluter kit.
Measure and mark the shower pan area, ensuring it's square and level. Ensure the drain is correctly positioned and accessible.



Installing the Schluter KERDI-BOARD
The Schluter KERDI-BOARD is a cement particle board designed for use with Schluter waterproofing systems. Install it according to the kit's instructions:
- Start at the drain and work outwards, staggering the joints between boards.
- Use the provided screws to secure the boards to the substrate. Maintain a consistent height and slope towards the drain.
Once all boards are securely fastened, check for level and adjust as necessary.
Waterproofing the Shower Pan
The Schluter KERDI membrane provides an essential watertight barrier around the shower pan. Here's how to install it:






Applying Schluter KERDI Membrane
Start at the drain and apply the KERDI membrane, working upwards. Ensure the membrane overlaps previous layers by at least 2 inches:
- Mix Schluter's KERDI-FIX adhesive or cement-based thinset according to the package instructions.
- Apply the adhesive to the KERDI membrane using a notched trowel.
- Press the membrane firmly onto the KERDI-BOARD, ensuring full adhesion.
Fold the membrane up the walls, allowing for at least 4 inches of overlap with the wall waterproofing system.
Installing Schluter KERDI-BAND and KERDI-KERB
The KERDI-BAND and KERDI-KERB Profiles help secure the membrane to the floor and walls, creating a seamless barrier:

- Install the KERDI-BAND along the base of the walls, securing it to the membrane with the provided fasteners.
- Install the KERDI-KERB around the drain, ensuring a tight seal with the KERDI membrane.
To finalize the waterproofing, ensure all joints are properly taped using Schluter's KERDI-Kwick or KERDI-SHOE sealant.
Congratulations! You've successfully installed your Schluter shower pan kit. Now, you can proceed with your tile installation, confident that your shower is protected from moisture and leaks. Consider consulting Schluter's technical support if you encounter any issues.




