How to Install IKEA Decking: A Step-by-Step Guide
Embarking on home improvement projects can be daunting, but with the right guidance, even complex tasks like installing IKEA decking can become manageable. This step-by-step guide will walk you through the process, ensuring a durable and aesthetically pleasing outdoor space.
Before you start, gather all necessary materials - IKEA's TARVA decking planks, support joists, screws, wood glue, a spirit level, measuring tape, Circular saw, drill, and safety gear. Double-check your order to ensure you have everything needed for your deck's size.
Planning Your Decking Area
Begin by measuring your outdoor area to determine the required number of decking planks.символ Jossticks should be placed 400mm apart centers for optimal support. IKEA's TARVA decking is 2400mm long, so plan your layout accordingly.



Consider using online decking planning tools or drawing your design on graph paper to visualize your layout. Ensure sufficient space for traffic flow and furniture arrangement.
Preparing Your Site
Mark out your decking area using stakes and strings. If you're building on existing hard landscaping like concrete or paving, ensure it's level and structurally sound. If you're building directly on soil, consider laying a base of gravel and sand before starting.



Contact your local utility services to mark any underground cable or pipework before breaking ground. Always follow local building regulations and obtain necessary permits if required.
Installing the Support Frame
Using a post-hole digger, create holes for your support joists. The depth should be approximately one-third of the total height of your decking. Fill the holes with concrete mix, insert the joists, and leave them to set according to the manufacturer's instructions.
Once the joists are secure, measure and cut the timber support beams to length. Ensure they're level and secure them to the joists using appropriate fixings. Use a spirit level to ensure the entire frame is level and square.






Laying the IKEA TARVA Decking Planks
Now that your frame is secure, it's time to start laying your TARVA decking planks. Begin at one corner, laying the planks perpendicular to the supports with a 5mm gap between each board for expansion.
Use an off-cut or waste piece of timber as a spacer to maintain consistent gaps between planks. Ensure each end of the plank overhangs the frame by at least 50mm to prevent water from pooling on the frame.
Securing the Decking Planks
Using a countersink drill bit, create pilot holes in the planks, ensuring they're aligned with the support joists below. Drive galvanized decking screws through the planks and into the joists, securing each plank securely. Leave the screw heads slightly proud to allow for water runoff.

Once all planks are secured, apply a bead of exterior wood glue along the gaps. This added layer of protection will help prevent water ingress and improve longevity. Wipe away any excess glue that squeezes out.
Finishing Touches
Allow the glue to cure according to the manufacturer's instructions. Once dry, lightly sand any rough edges or surfaces. Apply a suitable exterior wood treatment or sealant, following the manufacturer's guidelines for best results.
Regularly inspect your decking for signs of wear or damage, and reapply treatment as needed. Your IKEA TARVA decking should provide many years of service with proper care and maintenance.
Invite friends and family to admire your handiwork, and share your new outdoor oasis with them. Consider adding some outdoor furniture and plantation pots for a complete look. Happy decking!





