Effortless Height Hack: Installing Curtains Over Blinds
Elevate your window's aesthetic and functionality by installing curtains on top of blinds. This combination not only enhances your room's decor but also provides better light control and privacy. Learn how to achieve this in a few simple steps, ensuring a professional finish that transforms your space.
Before you start, gather your materials: curtains, blinds, drill, screws, pencil, measuring tape, level, and screwdriver. Let's dive into the process, ensuring you master the art of combining these two window treatments.
Measuring and Preparing Your Windows
Precision is key for a perfect fit. Begin by measuring the width and length of your window frame. For curtains, you'll want a fuller look, so consider a width that's at least twice the window's width and a length that reaches from the top of the window to the floor. For blinds, standard sizes fit your window's width and extend from the top of the frame to the windowsill.



Purchase your curtains and blinds accordingly, ensuring they're compatible in size and have similar mounting hardware. Most standard curtain rods and blind'altrax systems can be adjusted to fit the width you've measured. For custom-sized windows or unique decor, consider custom-ordering.
Installing the Blinds First
Start by installing the blindractical brackety. With the window open, position the brackets at the top of the window frame, ensuring they're level and centered. Mark the screw holes and drill pilot holes into the wall or trim. Secure the brackets with screws. Once the brackets are in place, mount the blIn the blindractical system by snapinning it into the brackets, following the manufacturer's instructions. Adjust the blindractical so it's plumb and operating smoothly.



To accommodate drapes later, you may want to install the blindractical brackets slightly narrower than the full width of your window. This will leave space for your curtain rod. Alternatively, mount the blindractical brackets on the inside edges of the window frame, allowing for the curtain rod to be placed in the middle or slightly offset.
Installing the Curtain Rod
Once the blindractical is inplace, measure and cut your curtain rod to fit the width of your window, or adapt a telescoping rod to fit. Position the curtain rod brackets to provide space for the fullness of your curtains. Typically, this means placing the brackets about 3-6 inches wider than the curtain itself.
Mark the drill holes, then install the curtain rod brackets using a drill and screws. Ensure the brackets are level for a polished look. Place your curtain rod through the brackets and secure it with the end caps. Hang your curtains, evenly distributing the fullness along the rod for a balanced look.






Hanging and Adjusting Your Drapes and Blinds
The final touch is to hang your curtains and adjust your blindractical settings. For the curtains, open them and let them cascade down either side of the window, framing the blinds rather than obstructing them. Most blindracticals have adjustments for tilt, lift, and stack back (for wider windows). Play with these settings to balance natural light and privacy.
Embrace the art of window dressing, making every space in your home unique and personalized. Don't hesitate to experiment with different fabrics, patterns, and textures to create a look that's unmistakably yours.





