Easy Guide: Install GarageBuddy Door Cover Step-by-Step
Are you tired of scraping your back against the harsh garage door edge every time you slip into your garage? Installing a garage door cover, like the Garage Buddy, can save you from this discomfort. This article guides you through the simple process, ensuring a snug, secure fit that keeps you cozy and unafected.
Before you start, gather your tools: Utility knife, measuring tape, pencil, drill with screwdriver bits (Philips head and flathead), level, Garage Buddy door cover, and a few screws.
Measuring and Preparing Your Garage Door
Precision is key when measuring your garage door. Most standard doors are 7 feet high and 8 or 9 feet wide. However, you should check your door's specific dimensions to guarantee a perfect fit.



Using your measuring tape, mark the desired height of your Garage Buddy on the door jambs with a pencil. Ensure the bottom edge is level to maintain a smooth, safe entry/exit point.
Installing the Garage Buddy
Garage Buddy components include the cover itself, screws, and a foam pad for comfort and insulation. Start by positioning the cover along your pencil lines. Ensure the bottom edge is level and the ends align with your door's edge.



Holding the cover in place, mark the screw holes where the cover will be fastened. Remove the cover and drill pilot holes using a bit slightly smaller than your screws' diameter. This prevents the screws from stripping the cover's material.
Securing the Garage Buddy
Re-position the cover, aligning it with your pilot holes. Secure the cover by screwing it into place. Ensure all screws are firmly tightened but not overtightened to avoid stripping the holes or warping the cover.
Once secured, check the cover's stability with a gentle tug. It should feel snug against the garage door but still allow it to open and close unimpeded. If necessary, adjust the cover's position or tighten screws to ensure a secure fit.






Adding the Foam Pad for Extra Comfort
The Garage Buddy comes with a foam pad for added comfort. Position this pad against the door cover, ensuring it covers the entire surface that meets your back during entry or exit.
-guide the pad's top into the slot at the top of the cover. Secure it with hook and loop fasteners or glue (if provided). Double-check that the pad is securely attached and uniformly distributed across the cover.
Testing Your New Garage Buddy
With the Garage Buddy and foam pad in place, it's time for a test run. Open and close your garage door several times to ensure it still functions smoothly. Note any adjustments needed and tackling them promptly.

Now, try walking through your garage door using the newly installed Garage Buddy. You should feel the difference: no more scraping, just a comfortable, secure entry and exit. Keep an eye on the cover and pad's condition over time, replacing it as necessary for continued protection and comfort.
Enjoy your garage door upgrade! A Garage Buddy installs in a few simple steps, transforming your garage entry into a comfortable, protected space. If you ever need a refresh, refer to this guide. Just remember to take your time, follow the steps closely, and always prioritize safety. Happy DIYing!





