Step-by-Step Guide: How to Install a Fiberglass Shower Insert
Installing a fiberglass shower insert can significantly enhance your bathroom's aesthetics and functionality. If you're looking to upgrade your shower space, you've come to the right place. This comprehensive guide walks you through the step-by-step process of installing a fiberglass shower insert, ensuring you achieve professional results.
Before we dive into the installation process, it's crucial to understand the benefits of fiberglass shower inserts. Fiberglass is durable, lightweight, and easy to maintain, making it an excellent choice for shower reins. It also provides a smooth, non-porous surface that resists mold and mildew growth. Now that we've established the advantages, let's proceed with the installation guide.
Preparation and Tools
Before installing your fiberglass shower insert, gather all the necessary tools and materials. A thorough preparation phase ensures the process runs smoothly and efficiently.



Here's a list of tools and materials you'll need:
- Fiberglass shower insert
- Construction adhesive
- Silicone caulk
- Measuring tape
- Utility knife
- Jigsaw
- Drill
- Screwdriver (matches the screws provided)
Measuring Your Shower Space
Accurate measurements are crucial for a perfect fit. Measure your shower space's length, width, and height, ensuring the insert you purchase aligns with these dimensions.



Also, consider the shower base's shape. Fiberglass inserts are available in various shapes, including square, rectangular, neo-angle, and corner. Make sure to buy an insert that fits your shower base's shape.
Removing the Old Shower
Before installing the new fiberglass shower insert, remove the old shower. You can do this by unscrewing the walls from the base, using a screwdriver that matches the screw heads. If the walls are adhered, you may need to use a utility knife to cut the caulk, then pry them off with a flathead screwdriver or a paint scraper.
Once the walls are off, remove any remaining screws or adhesive from the base, ensuring a clean surface for the new insert.






Preparing the Insert
Unbox your fiberglass shower insert and carefully examine it for any signs of damage. Inspect each panel—the walls and the base—for any tears, cracks, or veneer damage. If you find any imperfections, contact the manufacturer for a replacement.
Also, check if the insert is pre-fitted with shower components like showerheads, faucets, or handles. If not, ensure you have these components ready for installation.
Installing the Shower Base
The shower base is the foundation of your insert. Installing it correctly is essential for a level and secure shower. Start by cleaning the shower area to remove any dirt, debris, or residue. This step ensures a good bond between the base and the shower floor.

With the area clean, apply construction adhesive around the perimeter of the shower base using a caulking gun. Then, place the base into position, centering it within the shower space. Use shims or spacers to level the base if necessary. Allow the adhesive to cure as per the manufacturer's instructions.
Installing the Shower Walls
Before installing the shower walls, measure each wall panel to ensure they fit perfectly within your shower space. Use a utility knife to trim any excess material, if needed.
Once you've ensured the panels fit, apply construction adhesive to the back of each panel. Begin with the back wall, aligning it with the shower base and pressing it firmly into place. Secure the panel temporarily with painter's tape or clamps to maintain contact with the adhesive.
Attaching the Nails-Fin Plywood
Some fiberglass shower inserts may come with nails-fin plywood. This material is used to create a strong bond between the panels and the existing walls. Measure and cut the plywood to fit the space between the wall panels and the existing walls. Then, attach the plywood using screws or staples, ensuring a tight fit.
Once you've attached the plywood, apply construction adhesive to the seams and allow it to cure according to the manufacturer's instructions.
Finishing Touches
With the shower base and walls in place, you're almost done. The final steps involve applying silicone caulk to seal the seams and installing any shower components you removed earlier.
Use a caulking gun to apply a bead of silicone caulk along the seam where the shower base meets the walls. Also, caulk any holes or cracks you encountered during the installation process. Allow the caulk to dry as per the manufacturer's instructions.
Installing Shower Components
Reinstall any shower components you removed earlier. If you're installing new components, follow the manufacturer's instructions for proper installation.
Once all shower components are installed, turn on the water supply to test for leaks. If there are no leaks, your fiberglass shower insert is successfully installed!
Congratulations on your newly installed fiberglass shower insert! With proper care, it will provide you with years of comfortable and functional showering. Regularly clean your shower surface using a mild, non-abrasive cleaner to prevent soap scum and mineral buildup. Enjoy your updated bathroom space!




