A Simple Guide: How to Hang PVC Gutters
Investing in PVC gutters for your home is a smart decision due to their durability, resistance to corrosion, and low maintenance. But now comes the crucial part - installation. Hanging PVC gutters seems daunting, but with the right guidance, it's an achievable task. Let's dive into a step-by-step guide on how to hang PVC gutters like a pro.
Before you start, ensure you have all the necessary tools and materials. You'll need PVC gutters, gutter hangers, screw-in hangers, lag screw, nibbler, hacksaw, ladder, tape measure, and a sharp marker. Safety gear, including gloves and goggles, is also essential.
Preparing the Gutters
PVC gutters come in sections, so you'll need to connect them to form a continuous run. This process involves using a PVC cement glue specifically designed for gutter connectors.



Start by test-fitting your gutters to ensure they match the length needed. Once you're satisfied, apply the cement to the ends of the gutters and the inside of the connector. Press them firmly together and hold them for about 30 seconds. Repeat this process until all your gutters are connected.
Creating Inside and Outside Corners
At corners, you'll need to create inside or outside mitered joints. For inside corners, create a 45-degree angle on the top of the gutter with a miter saw. For outside corners, create a 45-degree angle on the backside.



Apply the cement to the ends of the gutters and the miter joints, press them together, and hold them for about 30 seconds. Ensure both miters meet nicely without any gaps.
Marking the Gutter Run
Using a tape measure, mark the locations for your hangers. The standard spacing is 24 inches on center. This means each hanger will be 2 feet apart. Mark these spots on the fascia board where the gutters will be attached.
Once you've marked your spots, use a nibbler to score the backside of the gutter at these locations. This will make it easier to snap the gutter to size. Then, use a hacksaw or miter saw to cut the gutter to length.






Installing the Gutters
Now that your gutters are prepared, it's time to hang them. Start at a corner and work your way along the roof. This will ensure you have enough gutter to cover the full length.
Begin by sliding the gutter under the first hanger. Then, insert a lag screw into the hanger and secure it to the fascia board. This will provide extra support and hold the gutter in place while you work.
Securing the Gutters with Hangers
With the first hanger secured, use a chalk line to snap a line level with the bottom of the gutter. This will help you keep the gutter level as you install it.

Continue installing the gutters by sliding them under the next hanger, leveling them with the chalk line, and securing them with lag screws. Ensure you space the hangers every 24 inches on center for proper support.
Installing Downspouts
Once your gutters are installed, it's time to add the downspouts. Downspouts should be spaced every 30 to 40 feet along the gutter run. Start by marking the location of the downspout on the gutter and wall.
Use a hacksaw to cut a hole in the gutter where the downspout will meet it. Then, attach the downspoutJoséhanger to the wall and the downspout elbow to the gutter. Connect the downspout sections and secure them with the provided screws.
Congratulations! You've successfully hung your PVC gutters. Regular maintenance, such as cleaning debris and checking for wear, will ensure your gutters continue to protect your home for years to come. Always remember safety first when working on ladders or heights. Happy home improvements!





