how to hang ikea liljetrad mirror

How to Hang the IKEA Liljetrad Mirror: A Step-by-Step Guide

By Melissa Jones
AD

Hanging the IKEA Liljetrad mirror is a straightforward task that can significantly enhance the aesthetic of your room. With just a few simple tools and steps, you can achieve a stylish, secured, and perfectly-positioned mirror. Let's dive into the process.

Before you start, ensure you have the following tools and materials: the Liljetrad mirror, a drill, appropriate drill bits, wall plugs, screws, a level, a pencil, and a measuring tape.

Preparation and Measuring

Accurate measuring is crucial to ensure your mirror is safely and symmetrically hung. Start by deciding on the location for your mirror, considering your room layout, focal points, and furniture arrangement.

AD
23 Brilliant Ikea Mirror Hacks That Transform Any Room
23 Brilliant Ikea Mirror Hacks That Transform Any Room
a bedroom with mirrored walls and white bedding in front of the mirror that reads, ikea diy paris mirror wall
a bedroom with mirrored walls and white bedding in front of the mirror that reads, ikea diy paris mirror wall
IKEA Hovet Mirror Installation and Hang Guide
IKEA Hovet Mirror Installation and Hang Guide

Once you've selected the position, use your measuring tape to determine the center point. Mark this spot with a pencil. This will help you ensure that your mirror is centered.

Gather the Right Tools

The IKEA Liljetrad mirror comes with a basic hanging kit, but for a stronger and more secure hang, consider adding a few tools to your list. A drill is essential for creating pilot holes and avoiding cracked plaster, while wall plugs can help distribute the weight and prevent damage.

113K views · 554 reactions | 🪞 Conseils déco avec les miroirs géométriques IKEA Quelques miroirs, une idée astucieuse Résultat : un élément déco qui agrandit visuellement l’espace et attire la lumière 🤍 📌 | Safari-Inspired Decor
113K views · 554 reactions | 🪞 Conseils déco avec les miroirs géométriques IKEA Quelques miroirs, une idée astucieuse Résultat : un élément déco qui agrandit visuellement l’espace et attire la lumière 🤍 📌 | Safari-Inspired Decor
The best Ikea hack ever 🫶🏻See how it turned out
The best Ikea hack ever 🫶🏻See how it turned out
Making a lighted mirror with IKEA NISSEDAL
Making a lighted mirror with IKEA NISSEDAL

Ensure you have the correct drill bit size to match your wall plugs and screws. A standard drill bit set should suffice, as the Liljetrad mirror uses 8mm or 1/4 inch holes. Additionally, a spirit level will help you achieve the perfect horizontal line.

Assessing Your Wall Type

Before you start drilling, assess the type of wall you're working with. Different wall types require different fixing methods. For concrete or brick walls, a masonry drill bit and wall plugs designed for these surfaces are necessary. For stud walls, locate the vertical timbers using a stud finder and fix your brackets to these.

AD

If you're unsure about your wall type, consider using an adhesive strip orcommand hook for a removable, damage-free solution. However, these may not support the Liljetrad mirror's weight.

24 Easy IKEA Mirror Hacks for a Gorgeous Home Update
24 Easy IKEA Mirror Hacks for a Gorgeous Home Update
a vase with flowers sitting on top of a wooden table in front of a mirror
a vase with flowers sitting on top of a wooden table in front of a mirror
IKEA Mirror Hack: BLODLÖNN Meets RIBBA
IKEA Mirror Hack: BLODLÖNN Meets RIBBA
The most incredible IKEA mirror hack! | By The Flipped Piece | When I tell you that this is one of my favorite IKEA hacks I've ever done I'm not kidding I went and bought a Larbro mirror for 13 and I got a big sheet of 18 millimeter thick MDF this is going to be the back of this giant mirror that I'm going to create I got this adhesive and I'm not going to say the name because it's a bad word but I marked out the center of this sheet and I used the adhesive to glue the mirror directly into the middle of the MDF backing I then headed over to my scrap wood pile and decide I'm going to build this mirror with all leftover pieces from previous DIY projects. So, I glued on some spare MDF to the bottom and I did the same thing to the top throughout this project. I got some long scraps of strip wood and data railing and I cut that down as well to kind of build a cabinetry type of look and this is going to make a really cool profound frame. I used that same adhesive to glue the scrap wood to the bottom and I nailed it in with my nail gun into the same to the top. When I'm finished, it looks something like this. I had lots of pieces of old decorative molding so I used that same adhesive and I glued that on as well just to give some more character and some style to this frame. And for the actual mirror itself, I used some more decorative molding and I built a frame around the mirror and I glued it directly around the edges so it looked like an actual picture frame. I then mixed up some two-part wood filler. This is an epoxy wood filler and it dries super rock hard and I just touched up all the nail holes and where all the edges of the wood meet and sanded it down so it was perfectly smooth. Next, I grabbed some wood glue. This is the tight bond. I use this for most of my projects in some half wooden beads and I glued these all around the top and the bottom to add some decor to the frame. Now, to paint it, I first chose the color chocolate and I painted the entire frame in this dark brown color. When it dried, I went back and I distressed the entire piece with 120 grit sandpaper. I wanted to make this piece look like really old and rustic wood so this is step one. When I distressed it to my liking, I took a much lighter color. This is the color drop cloth and I dry brush that color all over this mirror and this gave it a really weathered look. I did about two layers of dry brushing which means you literally just take your brush, wipe off the paint, and brush it all over so it goes on quite opaque and I got some wax and then I sealed it up with this big brush and I made sure to distress just a little bit more to have that wood pop through and this is the final result. Honestly, I wanted a mirror like this for the past, I don't know how many years but mirrors like this go for a couple hundred pounds and I made this for less than fifty. What do you guys think?
The most incredible IKEA mirror hack! | By The Flipped Piece | When I tell you that this is one of my favorite IKEA hacks I've ever done I'm not kidding I went and bought a Larbro mirror for 13 and I got a big sheet of 18 millimeter thick MDF this is going to be the back of this giant mirror that I'm going to create I got this adhesive and I'm not going to say the name because it's a bad word but I marked out the center of this sheet and I used the adhesive to glue the mirror directly into the middle of the MDF backing I then headed over to my scrap wood pile and decide I'm going to build this mirror with all leftover pieces from previous DIY projects. So, I glued on some spare MDF to the bottom and I did the same thing to the top throughout this project. I got some long scraps of strip wood and data railing and I cut that down as well to kind of build a cabinetry type of look and this is going to make a really cool profound frame. I used that same adhesive to glue the scrap wood to the bottom and I nailed it in with my nail gun into the same to the top. When I'm finished, it looks something like this. I had lots of pieces of old decorative molding so I used that same adhesive and I glued that on as well just to give some more character and some style to this frame. And for the actual mirror itself, I used some more decorative molding and I built a frame around the mirror and I glued it directly around the edges so it looked like an actual picture frame. I then mixed up some two-part wood filler. This is an epoxy wood filler and it dries super rock hard and I just touched up all the nail holes and where all the edges of the wood meet and sanded it down so it was perfectly smooth. Next, I grabbed some wood glue. This is the tight bond. I use this for most of my projects in some half wooden beads and I glued these all around the top and the bottom to add some decor to the frame. Now, to paint it, I first chose the color chocolate and I painted the entire frame in this dark brown color. When it dried, I went back and I distressed the entire piece with 120 grit sandpaper. I wanted to make this piece look like really old and rustic wood so this is step one. When I distressed it to my liking, I took a much lighter color. This is the color drop cloth and I dry brush that color all over this mirror and this gave it a really weathered look. I did about two layers of dry brushing which means you literally just take your brush, wipe off the paint, and brush it all over so it goes on quite opaque and I got some wax and then I sealed it up with this big brush and I made sure to distress just a little bit more to have that wood pop through and this is the final result. Honestly, I wanted a mirror like this for the past, I don't know how many years but mirrors like this go for a couple hundred pounds and I made this for less than fifty. What do you guys think?
a woman standing in front of a mirror with the words ikea mirror hack on it
a woman standing in front of a mirror with the words ikea mirror hack on it
DIY IKEA Mirror Wall Transform Your Space with Style!
DIY IKEA Mirror Wall Transform Your Space with Style!

Installing and Hanging the Liljetrad Mirror

Now that you've prepared and assessed, it's time to drill and hang your mirror. Start by positioning the mirror horizontally, aligning the top with your marked center point. Use the pencil to mark where the two mounting points should be.

Using your drill, create pilot holes at these marks. If you're using wall plugs, gently tap them into the holes with a hammer. If you're drilling into masonry, use a masonry drill bit and insert the wall plugs as described above.

AD

Attaching the Mirror Brackets

Next, attach the Liljetrad mirror's brackets. Most brackets come with screws that should be inserted from behind the bracket, through the bracket itself, and into the wall. Ensure you align the bracket's screw holes with your pilot holes or wall plugs.

21 Ingenious DIY IKEA Mirror Hacks To Transform Your Space
21 Ingenious DIY IKEA Mirror Hacks To Transform Your Space

Using a screwdriver or drill, secure the brackets to the wall. Ensure they're flush with the surface and level. You can use a spirit level for guidance.

Hanging the Mirror

Finally, it's time to hang the mirror. Carefully position the mirror so it slots into the brackets. As you lower it, ensure each side is evenly supported. Once both sides are secured, gently adjust the mirror until it's centered and level.

AD

Step back and admire your work. Your IKEA Liljetrad mirror should now be safely and stylishly hanging on your wall, ready to reflect your space beautifully.

Remember, the key to successful mirror hanging is preparation and patience. Measure twice, drill once, and always ensure you're following safety guidelines. Happy mirror hanging!

AD