how to get a garden tap installed

How To Get A Garden Tap Installed: Step By Step Guide

By Michael Thompson
AD

Whether you're a seasoned gardener or a green-fingered beginner, a reliable water source is crucial. Installing a garden tap ensures you can easily hydrate your plants, facilitate cleaning, and enhance the overall usability of your outdoor space. This comprehensive guide walks you through the process of getting a garden tap installed, from planning to completion.

Before you begin, understanding your local building regulations and any relevant water authority requirements is essential. You may need to obtain permits and ensure your tap installation complies with all safety standards. Additionally, it's crucial to choose the right tap – consider factors such as water flow, durability, and aesthetics to pick a tap that suits your garden's needs and appearance.

Planning and Preparation

Planning is key to a successful garden tap installation. Start by designating the optimal location for your tap, ideally near your garden's main water source and close to your plants. Consider any potential obstacles or structural aspects that might affect the installation process.

AD
Outside tap installation quick easy step by step easy installation garden tap
Outside tap installation quick easy step by step easy installation garden tap
How to Install an Outdoor Faucet
How to Install an Outdoor Faucet
an image of a garden hose connected to a water heater in the ground and attached to a pipe
an image of a garden hose connected to a water heater in the ground and attached to a pipe

Next, measure the distance from your designated tap location to your home's stopcock or main water supply. This will help determine the length of pipe and fittings required. It's also essential to consider the slope of your garden, as the pipe should be pitched slightly downwards to ensure proper drainage and prevent water stagnation.

Materials Needed

Based on your measurements and the complexity of your installation, gather the following materials:

How to Install an Outside Tap - Quick and Easy Method Anyone Can Do
How to Install an Outside Tap - Quick and Easy Method Anyone Can Do
How to Install an Outdoor Faucet
How to Install an Outdoor Faucet
How to Add a Spigot/Water Line & Faucet in Your Backyard
How to Add a Spigot/Water Line & Faucet in Your Backyard
  • Garden tap
  • Pipe – typically made of plastic (e.g., UPVC or PE) for outdoor use
  • Pipe fittings – elbows, T-joints, and end caps
  • Pipe cutter or hack saw
  • Tape measure
  • Spirit level
  • Tape – PTFE (plumber's tape) to prevent leaks
  • Waterproof tape or mastic to seal connections
  • Gloves and safety glasses

Tools Required

To complete the installation, you'll need the following tools:

  • Sealing compound and brush
  • Screwdriver or drill (if tap requires wall fixing)
  • Claw hammer (for striking the tap into the ground)
  • Spanner (to attach tap to the pipe)
  • Adjustable wrench

Installing the Garden Tap

Once you've gathered all necessary materials and tools, it's time to commence the installation process. Always ensure you've turned off the main water supply before starting work.

AD

Begin by cutting the plastic pipe to the required lengths using a pipe cutter or hack saw. Remember to wear gloves and safety glasses during this process. Assemble the pipework according to your planned layout, using fittings to create any bends or connections. Ensure each joint is firmly attached and seal with waterproof tape or mastic to prevent leaks.

an image of a drain in the ground that is going to be dug into the yard
an image of a drain in the ground that is going to be dug into the yard
how to install a great water garden spigot
how to install a great water garden spigot
a close up of a door handle on a wooden door
a close up of a door handle on a wooden door
a man fixing a water faucet on the side of a building
a man fixing a water faucet on the side of a building
Building a Garden Water Faucet
Building a Garden Water Faucet
Client Challenge
Client Challenge

Positioning the Tap

Mark the position of your tap on the wall or ground, ensuring it's level and at a comfortable height for use. If fixing the tap to a wall, use a drill or screwdriver to create pilot holes for the mounting screws. Secure the tap in position using the appropriate fixings provided with the tap.

If installing the tap directly into the ground, drive the tap stake into the soil using a claw hammer. Ensure the tap is secure and tightly packed to prevent any movement or wobbling. If necessary, use a spirit level to ensure the tap is plumb and perfectly vertical.

AD

Connecting the Tap to the Pipework

With the tap securely in place, connect it to the pipeline using a flexible connector or adapter if needed. Wrap the connector with PTFE tape to create a watertight seal. Attach the tap to the pipe using a spanner, turning the connector anti-clockwise to secure it firmly.

a man is holding a bucket in his hand
a man is holding a bucket in his hand

Once connected, open the tap to check for any leaks. If all is clear, slowly turn the main water supply back on. Test the tap at various drips to ensure it's working correctly and allows water to flow freely. If any issues arise, consult a professional plumber for advice and assistance.

Regularly inspect your garden tap for any signs of wear or leaks, and maintain it according to the manufacturer's guidelines. By following this comprehensive guide, you'll have a functional and reliable garden tap installed, making your outdoor space more versatile and enjoyable. Happy gardening!

AD
AD