Quick Fix: How to Repair Small Crack in Plastic Bathtub
Plastic bathtubs are durable and easy to maintain, but they're not immune to wear and tear. Cracks can develop, even in high-quality tubs, due to age, improper cleaning, or impacts. Fixing a small crack in a plastic bathtub isn't as scary as it sounds and can be done with a bit of patience and the right materials. Here's how to tackle this DIY project, making your tub look and function as good as new.
Before we dive into the step-by-step process, it's crucial to understand that this repair will create a watertight seal but won't restore the tub's original strength. As such, it's essential to be gentle with your tub post-repair to prevent new cracks. If the crack is extensive, it might be best to consider professional help or tub replacement.
Preparation: Gather Tools and Materials
The first step in fixing a plastic bathtub's crack is gathering the necessary tools and materials. While the exact items may vary based on the specific crack and the chosen repair method, here's a general list to get you started:



1. Clays or putties: These are specifically designed for repairing cracks in tubs and showers. They're easy to apply and create a watertight seal. Popular options include J-B Weld, Devcon, and Gorilla Glue 2-part Epoxy.
Evaluating the Crack
Before you start, carefully examine the crack:



- Size and depth: Measure the crack's length, width, and depth. This will help you determine if you have the right material for the job and how much you'll need.
- Location: Is the crack on the surface or beneath the waterline? If it's underwater, consider waterproofing the area around the crack before applying the putty.
Safety First
Before you begin, ensure:
- The area is well-ventilated to avoid inhaling fumes from the repair materials.
- You're wearing gloves and protective clothing to avoid skin contact with chemicals.
- Children and pets are kept away from the repair area to prevent accidents.
Repairing the Crack: Sanding and Application
With the crack evaluated and your workspace prepared, it's time to fix the crack. We'll use the J-B Weld method as an example, but the principles remain similar for other two-part epoxies.
1. Clean the area: Wipe the crack and surrounding area with a damp cloth to remove dirt and debris. Allow the area to dry completely.






2. Slightly widen the crack: Using fine-grit sandpaper (120-grit), lightly sand the crack to widen it slightly. This helps the repair material adhere better. Be extra careful not to create new cracks or damage the surrounding area. Wipe the cracked area clean with a damp cloth afterward.
Applying the Putty
Now it's time to apply the putty:
- Mix the putty: Follow the manufacturer's instructions to mix the two components. Typically, you'll mix equal parts of each component.
- Apply the putty: Using a putty knife or an old credit/debit card, apply a small amount of putty and press it firmly into the crack. Try to fill the crack fully with the putty. Wipe off any excess putty around the crack.
- Smooth the surface: Once the crack is filled, use a damp, smooth object, like a plastic card, to scrape off any excess putty and smooth the surface around the crack. This helps create a seamless finish.
Curing and Finishing
After applying the putty, allow it to cure according to the manufacturer's instructions. This typically takes 24 hours. During this time, avoid wetting or disturbing the repaired area.

Once cured, test the repair by filling a plastic bag with water and gently pressing it against the repaired area. If no water leaks, your repair is successful! To finish, you can sand any raised edges with fine-grit sandpaper and then clean the area with soap and water.
Protecting the Repair
With the crack repaired, it's essential to maintain and protect the area to prevent new cracks:
1. Avoid extreme temperatures: Keep your bathtub away from direct sunlight and heat sources to prevent warping and cracking.
2. Be gentle: Be careful when cleaning the tub and avoid using harsh chemicals near the repaired area.
3. Monitor the area: Regularly inspect the repaired area to ensure no new cracks develop.
Fixing a small crack in a plastic bathtub is a rewarding DIY project that saves you money and teaches you a new skill. So go ahead, grab your tools, and repair that crack today. Happy fixing!





