Repair Leaking Garden Tap: Step-by-Step Bunnings Guide
A leaking garden tap not only wastes water but can also be a sign of a more significant underlying issue. If you're a DIY enthusiast, fixing a leaking garden tap is a task you can tackle with the right tools and knowledge. Bunnings, Australia's leading home improvement warehouse, stocks everything you need to repair your leaky tap. Let's delve into a step-by-step guide to help you fix your tap and save water – and money.
First, it's crucial to understand the types of garden taps. Most outdoor taps are either compressionزم or ball valve taps. Compression taps have a washer that wears out over time, causing leaks. Ball valve taps, on the other hand, use a rubber seal to prevent leaks. This guide will focus on fixing compression taps, as they are more common.
Identifying the Type of Leak
Before starting any repairs, identify the type of leak you're dealing with. This will help you understand the cause and the necessary fix.



The two most common types of leaks are:
- Leaking from the tap handle: This is usually caused by a worn-out washer.
- Leaking from the tap base: This could be due to a faulty seal at the base of the tap.
Leaking from the Tap Handle
If your tap is leaking from the handle, chances are the issue lies with the washer. Here's how to replace it:



1. Turn off the water supply to the tap using the mains isolating valve. This is usually located near the tap itself or under your house.
2. Disassemble the tap by removing the handle, then the spindle (the part that inserts into the tap body), and finally the escutcheon (the plate sitting against the wall).
3. Remove the old washer and replace it with a new one. Make sure the new washer is the same size and diameter as the old one. Bunnings stocks a variety of washers that fit most standard taps.






4. Reassemble the tap in the reverse order, ensuring everything is tightened securely.
Leaking from the Tap Base
If your tap is leaking from the base, you may need to replace the tap entirely. However, before you do, try tightening the tap's retaining nut. If the leak persists, it's probably time for a new tap:
1. Follow the same initial steps as above: turn off the water supply and disassemble the tap.

2. Identify the faulty tap. In most cases, it will be the compression washer tap. Remove the retaining nut and slide out the old tap.
3. Choose a replacement tap from Bunnings. Make sure it's compatible with your tap's mounting hole size.
4. Slide the new tap into place, ensure it's securely tightened, and reassemble the tap handle and other parts.
Preventing Future Leaks
Regular maintenance can prevent leaks from happening in the first place. Here are some tips:
Drain your water lines: Before the winter sets in, drain your garden taps to prevent the water in the pipes from freezing and causing damage.
Insulate your taps: Wrapping your garden taps with insulating tape or a purpose-made sleeve can help keep the water warm and prevent freezing.
Check for blockages: Regularly check your tap's aerator (the screen at the end of the spout) for any blockages. If it's clogged with mineral deposits or sediment, soak it in white vinegar to dissolve the deposits, then scrub it clean.
Remember, safety is paramount when dealing with water and electricity. Always turn off the water supply before starting any repairs and unplug any nearby power tools. If the leak persists or you're unsure about any part of the repair process, don't hesitate to call a licensed plumber.
Fixing a leaking garden tap is a rewarding DIY task that helps you save water and money. With the right tools from Bunnings and this comprehensive guide, you're equipped to tackle this common home maintenance issue. So, get out there and save some water – and pat yourself on the back for a job well done! Happy DIYing!




