Step-by-Step Guide: How to Fit a Corner Bath
Installing a corner bath can transform your bathroom space, offering a luxurious and relaxing sanctuary in your home. With proper planning and the right tools, it's a manageable DIY project that can save you on labor costs. This comprehensive guide will walk you through the process, ensuring a professional finish.
Before you dive in, make sure you have the correct bath and all necessary hardware. Measure your space carefully to confirm the corner bath will fit, and check that your existing plumbing configuration is compatible.
Preparation and Essential Tools
To ensure a smooth process, gather all the necessary tools and materials:



- Adjustable wrench
- Tape measure
- Screwdriver
- Drill and drill bits
- Saw (if your bath isn't pre-cut)
- Spirit level
- Silicon sealant
- Plasterboard saw (if cutting into walls)



Plumbing Considerations
Check your existing plumbing. If the piping is located in the wrong position for a corner bath, you may need to hire a plumber to relocate the pipes.
Ensure you have the correct waste fittings for your corner bath. Check the manufacturer's instructions to confirm you have the right fittings for the type of floor and waste outlet in your bathroom.
Structural Integrity Check
Before installation, ensure the walls around the bath area are structurally sound. Fill any gaps or holes, and ensure the area is firm and stable for fixing.






If you're fitting a bath that's not pre-cut, you may need to cut the plasterboard around the bath to ensure a snug fit. Use a plasterboard saw for clean, neat cuts.
Dry Fitting the Corner Bath
Before fixing the bath permanently, perform a dry fit to ensure it fits perfectly and that all elements align correctly.
Position the bath in the desired location. Lift one side of the bath, then the other, to nudge it into the corner. Fit the waste outlet and taps, ensuring they line up correctly with the existing plumbing.

Securing the Bath
Once satisfied with the fit, start securing the bath. Use a spirit level to ensure it's level all around. Apply silicon sealant to the base of the bath and position it in place.
Drill pilot holes through the pre-drilled holes in the bath into the wall and floor. Secure the bath using the appropriate fixings provided with the bath. Use an adjustable wrench to tighten the fixings.
Fitting the Waste Outlet
After the bath is secure, fit the waste outlet. Apply silicon sealant around the outlet, then fit it to the underside of the bath, ensuring it aligns with the floor waste.
Connect the waste outlet to the u-bend. Secure it with an adjustable wrench and test the connection by pouring water into the bath and running the shower.
Finishing Touches
The final steps involve ensuring a watertight seal and, importantly, testing your new corner bath.
Apply silicon sealant along both top edges of the bath, leading up to the tiles or wall. Ensure the sealant is smooth and even.
Waterproofing
Check that the waste outlet is properly sealant and waterproof. If your bath has taps or a mixer out of the box, ensure these are fitted correctly and watertight.
Safety First: Always ensure all electrical work around the bathroom is done by a qualified electrician.
Testing the Bath
Before using the bath, run water to check for leaks. Fill the bath with about 5cm of water. Check all areas around the bath, the waste outlet, and any taps for leaks.
Once satisfied with the check, drain the water. Now, you can enjoy your newly fitted corner bath!
Adding a corner bath to your home can significantly boost its value and provide many years of relaxation. By following this comprehensive guide, you'll have your perfect bathroom sanctuary installed in no time. Happy bathing!





