Mastering Bathroom DIY: Finish Wall Around Tub Surround in a Flash
Tackling a bathroom renovation project on your own can be an exciting and rewarding experience. One of the tasks you might find yourself tackling is how to finish a wall around a tub surround. After all, it's not just about functionality; it's about creating a space that's both pleasant and inviting. But where do you start? Let's dive into the process step by step, ensuring a perfect, professional finish.
The process of finishing a wall around a tub surround involves several key steps, from planning and preparation to the final touches. With the right approach and a bit of know-how, you can create a beautiful, durable, and waterproof barrier that not only protects your walls but also enhances the aesthetics of your bathroom. So, let's roll up our sleeves and get started!
Gathering Materials and Tools
Before you can embark on your project, you'll need to gather the necessary materials and tools. This includes waterproof drywall, cement board, or green board, as well as hardware such as screws and nails. You'll also need tools like a utility knife, jigsaw, measuring tape, and a drill.



It's crucial to choose the right materials for your tub surround. While standard drywall can work, it's not waterproof and can be prone to damage in a humid environment. Opt for waterproof options like green board or cement board to ensure longevity and durability.
Planning and Measuring
Once you have your materials and tools ready, it's time to plan and measure. Measure your tub wall carefully to ensure your cuts are accurate. Consider the height of your tub and the desired height of your finished wall. Use this information to determine the size of your panels.



Planning also involves deciding how you want to finish your wall. Will you be installing tile, wainscoting, or simply painting? This decision will impact the type and number of materials you need, as well as the steps involved in your project.
Determining Panel Size
To determine the size of your panels, start by measuring the height and width of the tub surround. Most panels are sold in standard sizes, so you may need to cut them to fit your specific dimensions. Measure twice to ensure your cuts are accurate, as cement board and green board can be harder to cut than standard drywall.
Consider using larger panels where possible to reduce the number of seams in your wall, which can be prone to leaks and damage. Strategically plan your cuts to minimize waste and make the most of your materials.






Gathering Additional Tools
Beyond the initial tools mentioned, you might also need additional tools depending on your chosen finish. If you're installing tile, for example, you'll need a trowel, spacers, and a tile cutter. If you're painting, you'll need paint, brushes, and paint tape. Always ensure you have the right tools for the job to prevent damage and ensure a professional finish.
Once you have your materials, tools, and measurements ready, you can move on to the next step: installing your panels.
Installing the Panels
Installing the panels involves securing them to the studs behind the drywall with screws or nails. This provides a solid base for your finish and helps prevent movement and damage. Start by finding the center of the wall and working your way out, ensuring your panels are square and evenly spaced.

Use construction adhesive along the edges of your panels to enhance their bond with the existing wall and ensure a watertight seal. If necessary, use shims to maintain a small gap between the panel and the tub to accommodate expansion and contraction.
Securing the Panels
Use screws or nails to secure your panels to the studs. Ensure they are evenly spaced and driven in straight. Make sure to use the appropriate length screws or nails to ensure they penetrate at least 3/4" into the stud for a solid hold. Always check the manufacturer's recommendations for the best results.
If you're using screws, consider using paintable, corrosion-resistant screws for a finished look. You can also use a screw cover to hide the screw head if desired. If you're using nails, ensure they are fully set and countersunk to prevent them from sticking out and damaging your finish.
Finishing the Panels
Once your panels are securely in place, it's time to prepare them for your chosen finish. This might involve applying joint compound to the seams, letting it dry, and sanding it smooth. If you're installing tile, you may need to apply a tile backer board or mesh over your panels to create a flat, sturdy surface.
Regardless of your finish, always ensure any seams are properly sealed with a waterproof sealant to prevent moisture from penetrating the wall. This will help protect your walls and prevent water damage.
Applying the Final Finish
Now that your walls are ready, it's time to apply your final finish. This could be anything from painting to tiling. If you're painting, use a waterproof paint to ensure your finish can stand up to the humid environment. If you're tiling, consider using a water-resistant tile adhesive and grout for additional protection.
Always follow the manufacturer's recommendations for the best results. This includes prep, application, and drying times. Taking your time and following the instructions carefully can help ensure a lasting, professional finish.
Painting
If you're painting your tub surround, start by applying painter's tape along the edges of your wall to protect adjacent surfaces. Then, apply a coat of primer to seal the surface and create a smooth base for your paint. Once the primer is dry, apply your paint in even coats, allowing it to dry between applications.
Use a paint roller for large surfaces and a paintbrush for edges and details. Consider using a combination of both for a professional-looking finish. Always sand lightly between coats to ensure a smooth, even surface.
Tiling
If you're tiling your tub surround, start by applying a water-resistant tile adhesive to the surface. Use a trowel to spread the adhesive evenly across the wall, ensuring adequate coverage. Then, apply your tile, using spacers to create even gaps between each tile.
Lay your tiles in a staggered pattern for added stability and aesthetic appeal. Allow the adhesive to cure according to the manufacturer's instructions. Once it's dry, apply grout to fill the gaps between your tiles. Wipe away excess grout with a damp sponge and allow it to dry and cure.
Finally, clean your tiles with a suitable cleaner and allow them to seal. This will protect your tiles from stains and prevent moisture damage.
And there you have it! By following these steps, you can create a beautiful, functional, and waterproof wall around your tub surround. Remember, the key to a great result is taking your time and ensuring each step is done correctly. A professional finish is a rewarding accomplishment, and with a bit of elbow grease and knowledge, it's within anyone's reach.
So go ahead, embrace your DIY spirit, and enjoy the process of transforming your bathroom into a space you truly love. Happy renovating!



