"Seal the Deal: Easy Steps to Enclose Your Deck Bottom"
Enclosing the bottom of a deck not only enhances its aesthetic appeal but also provides crucial safety and weatherproofing. With the right materials and techniques, you can safeguard your deck's structural integrity and extend its lifespan. In this comprehensive guide, we'll walk you through the process, from measuring to installation, ensuring you get it right the first time.
Before we delve into the details, let's clarify that enclosing the bottom of your deck involves two primary approaches: skirting and screening. Skirting refers to enclosing the space underneath your deck with solid materials, while screening involves using ventilation materials to keep critters out while allowing airflow. Both methods serve their unique purposes, so choose based on your specific needs.
Materials and Tools
Regardless of the approach you take, gather these essential materials and tools:



- Measurements and diagrams
- Cement or lattice panels (for screening)
- Vinyl or wood panels (for skirting)
- Staple gun and galvanized staples
- Saw (for cutting panels)
- Hammer
- Nails or screws (if using wood)
- Drill and screws (for secure attachment)
Measurements
Accurate measurements ensure a perfect fit, so meticulously measure the length, height, and width of your deck, both underneath and on the sides. Sketch a diagram for reference during the installation process.
Moreover, consider the space between your deck joists, which will determine your panel size. Standard 2x4 joists are spaced 16" on center, requiring panel heights divisible by that number. If you're using non-standard spacing, adjust your panel sizes accordingly.



Material Selection
Cement or lattice panels, often made of vinyl or composites, work well for screening, providing ventilation while deterring pests. For skirting, consider durable, low-maintenance materials like vinyl or cedar, which resists rot and insects.
Besides aesthetic preferences, consider your budget and the level of maintenance you're willing to undertake. For instance, cedar requires periodic staining or sealing, while vinyl is virtually maintenance-free.
Installing Concrete or Lattice Panels
Concrete or lattice panels are easy to install and offer mesh-like strength, making them ideal for screening. Here's a step-by-step guide:






1. Cut your panels to match your measurements using a saw.
2. Begin at one corner of your deck, secure the first panel horizontally using screws or nails.
3. Hold the next panel vertically next to the first, aligning it within the joist space. Secure it in place.

4. Continue installing panels horizontally, overlapping the vertical edges to create a secure seal.
5. Repeat this process for the entire perimeter of your deck. Ensure you keep the panels taut throughout the installation.
Installing Vinyl or Wood Panels
Vinyl and cedar panels are perfect for skirting, offering a clean, finished look. Here's how to install them:
1. Measure and cut your panels to size, offsetting joints for added strength.
2. Position the first panel horizontally at the bottom of your deck frame, ensuring it's square and level.
3. Secure the panel temporarily with a couple of screws or nails at each end.
4. Align the next panel vertically, overlapping the horizontal panel by at least 1/2". Secure it firmly.
5. Repeat this process, working horizontally and alternating vertical panels to ensure a watertight seal. Remember to stagger joints for added strength.
Backfilling and Finishing Touches
Once your panels are installed, consider backfilling the space underneath your deck with gravel to further discourage pests and promote drainage. Completed with care, your newly enclosed deck bottom will be a safe, inviting space, ready to withstand the test of time.




