Drain Your Garden Spa Hot Tub: A Step-by-Step Guide
Draining your garden spa or hot tub is a crucial maintenance task that ensures a clean, healthy, and enjoyable soaking experience. Regular drainage removes contaminants, prevents bacteria growth, and maintains your spa's longevity. Here's a step-by-step guide on how to drain your garden spa hot tub in a safe and efficient manner.
Before you begin, ensure that your spa is off, and all electrical components are disconnected to prevent accidents. Always drain your spa onto a permeable surface or use a pump to redirect the water to an approved disposal area, such as a storm drain or septic system. Never drain your spa directly into a sewer system or waterway.
Preparing Your Spa for Draining
Preparation is key to ensuring a smooth and effective drainage process. Begin by performing the following steps:



Adding a Spa Drain Cleaner
Add a spa drain cleaner product designed to break down oils, lotions, and other contaminants that can clog your drain lines. These products are available at most pool and spa supply stores. Follow the manufacturer's instructions for proper usage and safety guidelines.
Run your spa's jets and circulate the water for at least 15 minutes to ensure the drain cleaner is fully mixed and effective in breaking down contaminants. Then, turn off your spa and allow the cleaner to work for the recommended time, usually 2 to 3 hours.



Closing the Air Valves and Draining the Filter
Close the air valves located on the equipment manifold of your spa's plumbing system. This step is crucial to prevent air from entering the plumbing lines and causing issues during the draining process.
Drain your spa's filter by placing a bucket under the filter drain valve, opening the valve, and allowing the water to flow into the bucket. Discard or repurpose this water as appropriate for your area's regulations. Ensure that the filter is completely drained to facilitate the overall draining process.
Draining Your Spa or Hot Tub
Now that your spa is prepared, you can proceed with draining it efficiently and safely:






Locating the Drain Plug and Pump Valves
The drain plug is typically located at the lowest point of your spa's shell, near the equipment area. Some tubs may have a built-in drain pump, while others require a submersible pump. Ensure you have the correct pump and equipment for your spa's model.
Close the valves for the return and recirculation lines connected to your spa's circulation pump to prevent water from being pumped back into the spa during drainage.
Removing the Drain Plug or Submersible Pump
For spas with a removable drain plug, place a bucket under the drain to catch any remaining water in the bottom of the spa. Unscrew the plug and allow the water to drain completely. For spas using a submersible pump, place the pump in the spa and position the discharge hose over the desired drainage area.

Turn on the submersible pump and allow it to drain the spa completely. Monitor the drainage process to ensure that no air is being pushed into the plumbing lines, as this can cause gurgling noises and/or a loss of prime in the pump.
Cleaning and Refilling Your Spa
Once your spa is completely drained, use a shop vacuum or a high-pressure hose to remove any remaining debris from the shell's surface. Scrub the surfaces with a non-abrasive sponge or washcloth and a suitable cleaning agent to remove any remaining contaminants.
After cleaning, it's time to refill your spa. Consult your spa's manufacturer guidelines for the appropriate water level and maintenance chemical regimen. Ensure that your filtration system is operational and that the water is properly balanced and sanitized before inviting guests to enjoy a relaxing soak in your clean and inviting garden spa hot tub.
Regular drainage and maintenance are essential for keeping your garden spa hot tub in excellent condition. By following these steps and scheduling regular drain and clean cycles, you'll extend the life of your spa and ensure a pleasant experience for all its users. Happy soaking!





