how to cut govee rgbic led strip lights

How to Cut Govee RGBIC LED Strip Lights

By Ashley Brown
AD

Govee RGBIC LED strip lights add a vibrant and dynamic touch to any space, but when it comes to cutting them to size, many users are left scratching their heads. Fret not, for with the right tools and a little know-how, you can easily cut Govee RGBIC LED strip lights and install them with professional-like results. Let's dive into how to cut Govee RGBIC LED strip lights, ensuring that your DIY project shines brightly and safely.

Before we start, let's ensure you have the necessary tools. You'll need a pair of sharp scissors or scissors designed for cutting such strips. While you can use wire cutters, they may crushing the copper contacts, leading to poor connections. Also, have a tape measure, marker, and a flat working surface ready.

Understanding Govee RGBIC LED Strip Lights

Govee RGBIC LED strip lights are designed with specific intervals between each LED. Cutting at these intervals ensures that each LED receives power and functions correctly. The LED units are typically spaced 3 LEDs per foot (10 LEDs per meter) for Govee's RGBIC strips.

AD
How to Fix Govee Led Strip Lights
How to Fix Govee Led Strip Lights
Govee RGBIC Lights Setup for Stunning Rooms
Govee RGBIC Lights Setup for Stunning Rooms
Learn How to Cut LED Strip Lights the Right Way
Learn How to Cut LED Strip Lights the Right Way

Each LED unit consists of several small diodes, including the RGBIC chip, which enables the color-changing magic. Between these units, you'll find copper contacts that transfer power from one section to the next. The goal is to cut the strip such that these contacts remain unharmed.

Measuring and Marking

Start by laying out your strip on a flat surface. With a tape measure, determine the desired length, ensuring you choose a point that falls directly after an LED unit to avoid damaging any diodes.

How To CUT, EXTEND and CONNECT LED Strips
How To CUT, EXTEND and CONNECT LED Strips
How to Connect Govee Lights Together Without Connector
How to Connect Govee Lights Together Without Connector
Where To Cut Led Light Strip? Complete Step-By-Step Guide!
Where To Cut Led Light Strip? Complete Step-By-Step Guide!

Using a marker, make a small dot on the adhesive side of the strip at the measured point. Do not mark on the copper contact area. Make sure the mark is visible but not so big that it affects the strip's integrity.

Cutting the Strip

Now it's time to cut. Place your scissors at the marked point, ensuring the blades are aligned with the copper contacts. Press down firmly and evenly, cutting through the strip. With proper technique, you should not need to saw back and forth.

AD

Note: Govee RGBIC strips have a protective coating over the copper contacts. This can be cut through with care, but if it's too thick, you may need to carefully scrape it off after cutting to expose the contacts.

Govee RGBIC LED Strip Lights &’ Govee TV Backlight 🚥
Govee RGBIC LED Strip Lights &’ Govee TV Backlight 🚥
How to Cut Govee Led Lights
How to Cut Govee Led Lights
someone is cutting the tape off of a wall with scissors
someone is cutting the tape off of a wall with scissors
Govee RGBIC LED Strip Lights | Color Changing Bedroom Lights Music Sync
Govee RGBIC LED Strip Lights | Color Changing Bedroom Lights Music Sync
Govee RGBIC Smart LED Strip Lights 16.4ft
Govee RGBIC Smart LED Strip Lights 16.4ft
Govee 100ft RGBIC LED Strip Lights
Govee 100ft RGBIC LED Strip Lights

Preparing the Cut Ends

After cutting, you'll need to prepare both ends for connecting. At the end where you cut, the copper contacts may be exposed. If so, carefully scrape any remaining protective coating off the exposed copper using a flathead screwdriver or a tweezers.

At the other end, you'll need to expose the copper contacts if they're not already visible. Carefully peel back the strip's casing to reveal the contacts. Be gentle to avoid ripping the copper.

AD

Connecting the Strips

Once both ends are prepared, you can connect your strips. Govee's RGBIC strips typically use a 4-pin connector. Align the pins and firmly press the connectors together. Ensure all pins are properly connected and secure.

If you're connecting multiple strips, stagger the cuts to ensure a seamless, continuous light effect. This also helps to distribute the weight and prevent any one section from sagging.

Finally, test your light strips to ensure all LEDs are working correctly. Once satisfied, securely attach your Govee RGBIC LED strip lights to their intended space, and enjoy your transformed ambiance.

AD

And there you have it - well-lit and safely cut Govee RGBIC LED strip lights that add a touch of grace to your space. Explore different colors and patterns to continually refresh your space. Happy lighting!

AD