Mastering Plastic Garden Edging: Step-by-Step Cutting Guide
Choosing plastic edging for your garden is a wise decision, as it's durable, versatile, and low-maintenance. However, cutting it to size can be a challenge if you're not sure how to go about it. Fear not, as this comprehensive guide will walk you through the process, ensuring precision and safety.
Before you start, remember that safety is paramount. Always wear work gloves and protective goggles. Also, ensure your cutting tool is in good condition to prevent splinters and unwanted results.
Selecting the Right Cutting Tool
Your choice of cutting tool depends on the thickness and size of your plastic edging. For thin edging, a simple handsaw, hacksaw, or reciprocating saw will suffice. For thicker edging, you might need a miter saw or a Circular saw.



Whether you're using a manual saw or a power tool, the technique remains similar. Just remember, take your time and measure twice before you cut once.
Using a Handsaw or Hacksaw
These manual tools are useful for thin, flexible plastic edging. Start by marking your cutting line with a pen or a pencil. Place the blade of the saw on the line, ensuring it's at a 45-degree angle. Apply steady pressure and saw back and forth until you've cut through the plastic.



If you're cutting a 45-degree angle for a corner, first calculate the 45-degree angle on a scrap piece of plastic to ensure accuracy. Then, mark it on your edging and saw along the line.
Utilizing Power Tools
For thicker plastic edging or for faster cutting, use a power tool like a miter saw or a Circular saw.Follow the same process - mark your cutting line, place the blade against it, and cut. Ensure you're wearing safety gear and that your tool is fitted with the correct blade for plastic.
When using a miter saw, you can set the angle for 45 degrees for corner cuts. If you're using a Circular saw, mark the angle on the edging and carefully align the blade with your mark.






Cutting Techniques for Specific Edging
Different types of plastic edging require slight variations in cutting technique.
The majority of plastic edging, including L-shaped or channel edging, can be cut using the techniques mentioned above. However, if you're dealing with edging that has anchoring spikes, you'll need to score the plastic before cutting.
Scoring and Snapping Edging with Anchoring Spikes
Start by placing the edging on a flat, stable surface. Use a utility knife to score a line along the cutting mark. Be careful not to cut too deeply as this can create unwanted cracks.

Once you've scored the line, hold the edging firmly with one hand and use your other hand to snap the edging along the score line. The plastic should break cleanly, leaving you with a straight, smooth edge.
Cutting Curved Edging
For curves, you can use a jigsaw fitted with a fine-tooth blade. First, draw the curve on your edging using a flexible curve template or a string. Then, place the edging on a workbench, ensuring it's secure. Guide the jigsaw along the marked line, cutting carefully and slowly.
Test fit your cut edging. If it's not a perfect fit, make adjustments as necessary. Re-cut until you achieve the desired curve.
Remember, practice makes perfect. The more you cut, the better you'll get. Always take your time, measure accurately, and prioritize safety. Happy gardening!





