how to cut and connect govee led strip lights

Easy Govee LED Strip Light Tutorial: Cut & Connect Guide

By David Williams
AD

Transforming your space with Govee LED strip lights is an exciting task, and cutting and connecting them correctly is the backbone of this process. With a little understanding of the process and the right tools, you can create stunning ambient lighting effects that set the perfect mood. Let's dive into a step-by-step guide on how to cut and connect your Govee LED strip lights.

Before you start, ensure you have the following tools at hand: scissors or a cutter, a ruler, electrical tape, and your Govee LED strip lights. Larger cuts may also require a Dremel or a craft knife. Now, let's explore the two primary steps: cutting and connecting your LED strips.

Cutting Govee LED Strip Lights

Govee LED strip lights come with pre-determined cut points, marked on the copper pads on the back of the strip. These points allow you to cut the strip every 2 inches, enabling you to adjust the lighting to fit your needs.

AD
How to Connect Govee Lights Together Without Connector
How to Connect Govee Lights Together Without Connector
How To CUT, EXTEND and CONNECT LED Strips
How To CUT, EXTEND and CONNECT LED Strips
the diy guide to connecting led strip lights is shown in this graphic above it's description
the diy guide to connecting led strip lights is shown in this graphic above it's description

To ensure a clean cut:

  • Use scissors or a cutter designed for copper wire to avoid damage to the circuit.
  • Cut along the pre-determined lines, being careful not to cut through the copper pads themselves.
  • Test the cut by gently bending the strip at the newly cut end. If the circuit is intact, the LED should remain lit.

Creating Right-Angle Cuts

Right-angle cuts allow you to change the direction of your lighting, ideal for complex installations or corner applications. To perform a right-angle cut:

How to Cut Govee Led Lights
How to Cut Govee Led Lights
Where To Cut Led Light Strip? Complete Step-By-Step Guide!
Where To Cut Led Light Strip? Complete Step-By-Step Guide!
Learn How to Cut LED Strip Lights the Right Way
Learn How to Cut LED Strip Lights the Right Way
  1. Locate two cut lines that are perpendicular to each other on the copper pads and cut along both lines.
  2. Score the thin film between the two cuts using a Dremel or a craft knife. Make sure not to cut through the film completely.
  3. Carefully bend the strip along the scored line to achieve the right-angle cut. Again, test the cut to ensure it's working correctly.

Understanding Strip Lengths

Govee LED strip lights typically come in lengths of 16.4 feet (5 meters). If your project requires a shorter length, cut the strip to size, ensuring you start and end each section at a cut point.

Govee strip lights are also bi-directional, meaning you can cut them from either end. However, it's essential to ensure you've cut in the correct direction, as the positive and negative connections are only made at the ends of the strip.

AD

Connecting Govee LED Strip Lights

Connecting your LED strip lights correctly is crucial to ensure they function correctly and safely. Each strip has a positive (+) and a negative (-) connection on the back, indicated by arrows or '+-'.

How to Install LED Strip Light Solderless Connectors
How to Install LED Strip Light Solderless Connectors
How to Cut Govee LED Lights and Connect Them Together?
How to Cut Govee LED Lights and Connect Them Together?
someone is cutting the tape off of a wall with scissors
someone is cutting the tape off of a wall with scissors
Light Covers Over LED Lights Is It Safe
Light Covers Over LED Lights Is It Safe
How to Fix Govee Led Strip Lights
How to Fix Govee Led Strip Lights
How to Cut, Connect and Power LED Strip Lights
How to Cut, Connect and Power LED Strip Lights

To connect your strips:

  1. Check the direction of the strip, ensuring you're connecting the correct ends.
  2. Strip them back from the area you want to connect, exposing about 0.5 inches of the copper pads.
  3. Carefully align the two exposed ends, ensuring the positive (+) connects with the positive (+) and the negative (-) with the negative (-).
  4. Use electrical tape or the provided 3M tape to secure the connection, ensuring a strong bond to prevent any short circuits.

Connecting to a Controller or Power Supply

Once you've connected your strips, you'll need to connect them to a power source or controller. If you're using a Govee controller:

AD
  1. Attach the controller to the wall or near the power outlet using the provided adhesive strip or screws.
  2. Connect the power adapter to the controller and plug it into a power outlet.
  3. Clip the control box onto the strip using the provided clip, ensuring the contacts align correctly. The controller should now power your strip lights.

Safety Considerations

Working with electrical components requires care to ensure safety:

Can You Cut LED Strip Lights Anywhere? | Your Questions Answered
Can You Cut LED Strip Lights Anywhere? | Your Questions Answered
  1. Always work with the power turned off and follow the manufacturer's instructions for your specific strip lights.
  2. Ensure your connections are clean and secure to prevent short circuits.
  3. If you're uncertain about any aspect of the installation, consult a professional electrician.

Creating the perfect ambient lighting with Govee LED strip lights is easier than you think. With a bit of planning, the right tools, and careful execution, you can transform your space into a cozy, inviting haven. So, don't hesitate to cut, connect, and bring your lighting vision to life!

AD