"Mastering Shower Tile: Step-by-Step Guide on How to Cover"
Tackling a shower tile refresh? You're in the right place! Covering old or installing new shower tiles isn't only about aesthetics; it's also about functionality and hygiene. Let's dive into the world of grout and tiles, and learn how to cover shower tile like a pro.
Before we grab our trowel and tile nippers, let's ensure we have the right tools and materials. A well-equipped DIY warrior needs a level, trowel, tile nippers, tile cutter or wet saw, grout float, sponge, rubber gloves, safety glasses, and, of course, the tiles and grout. Now, let's not waste another minute and get our hands dirty!
Preparation and Surface Preparation
First things first, safety. Put on those safety glasses and ensure the room is well-ventilated. Remove any old tiles, scrub the wall with a solution of trisodium phosphate (TSP) and water, then rinse and let it dry. If you're dealing with mold, use a mold removal product.



Inspect the wall for any irregularities. Use a level to mark vertical lines along the wall, and ensure you have a steady, even surface to tile on. If necessary, address any issues with drywall repair compounds or a leveling primer.
Choosing the Right Tiles
Shower tiles come in various materials - ceramic, porcelain, stone, etc. Choose based on the look you want, but also consider durability, slip-resistance, and ease of cleaning. Larger formats are trending, but they require expert installation. Opt for smaller tiles if you're a DIY newbie.



Two more tips: First, buy 10% more tiles than you need for cuts and breakages. Second, before you start, lay out your tiles on the floor to ensure you're happy with the pattern.
Laying Tiles: The Dry Run
Before applying mortar, do a dry run. Spread your tiles along the wall starting from the bottom, using the lines you marked earlier as a guide. Apply any necessary spacers for even grout lines.
Once you're satisfied, remove the tiles and mix your mortar according to the package instructions. Always wear rubber gloves for this part - trust us, you'll thank us later!






Applying Tiles and Grout
Starting from the bottom, apply mortar to the wall surface using a notched trowel. 'Scoring' the surface helps the mortar bond. Press the tiles firmly into place, using spacers to maintain even gaps.
Repeat this process for the entire wall. Remember to leave a 1/8" expansion gap at the top for movement and along sides if another wall or fixture aligns. Once complete, allow the mortar to cure as per the manufacturer's instructions.
Grout Application
Mix your grout, following the package instructions, and apply it to the tile surface using a grout float, held at a 45-degree angle. Work diagonally, forcing the grout into the joints. Ensure full coverage, and remove excess grout from the tile surface.

Allow the grout to set for the recommended time (usually 15-30 minutes), then use a damp sponge to clean the tiles, working diagonally to remove excess grout haze. Let it cure for at least 72 hours before exposing it to moisture.
Final Touches
The fun part! Seal your grout lines to protect from moisture and make cleaning easier. Apply sealant with a soft brush or cloth, following the manufacturer's instructions. Allow it to dry, then wipe off any residue.
Finally, let's not forget about cleaning up. Dispose of any leftover materials responsibly, and give your newly tiled shower a good rinse to remove any lingering debris.
And there you have it! A job well done (and no Pearce Brothers in sight). But remember, if you're in doubt, always consult a professional. Happy tiling!





