How to Connect Tape Lights Together: Simplest Methods
Connectingtape lights together cantransform any space, from undercabinet kitchen lighting to ambient fallback lightning. However,figuring out how to connect these lights efficiently can be a challenge. This guide will walk you through the process, ensuring your tape lights are harmoniously linked and shining brightly.
Before we dive into connecting tape lights, let'sunderstand what we're working with. LED tape lights, also known as strip lights, come in various sizes and colors. They typically have a receiver end and a sender end, indicated by an arrow on the light strip. The sender end emits the electrical signal, while the receiver end accepts it.
Choosing the Right Connectors
To connect tape lights, you'll need the appropriateconnectors. These come in two types: butt connectors and screw connectors. Butt connectors, also called inline connectors,join lights side by side. Screw connectors, or jumper wire connectors, allow you to extend lights end to end.



Always ensure your connectors match the amperage of your tape lights. Using incompatible connectors candamage your lights or even cause a fire.
Using Butt Connectors
Butt connectors are ideal for creating parallel connections, likeunięn under-cabinet lighting across multiple cabinets.



To use butt connectors:
- Strip off about 3/4" of the tape's adhesive backing and copperfoil at the point where you want to connect.
- Align the two tape lights with the exposed copperfoil touching.
- Slide the butt connector over both tapes, ensuring the copperfoil is fullyinserted into the connector.
- Secure the connector with electrical tape or heat shrink tubing for added stability.
Using Screw Connectors
Screw connectors are perfect for extending tape lights end-to-end.
To use screw connectors:






- At the end of the first tape light, strip off about 1" of the adhesive backing and copperfoil.
- Strip the recipient end of the second tape light in the same manner.
- Slide the screw connector over the first tape, ensuring the exposed copperfoil is fully inserted.
- Thread the stripped end of the second tape through the connector and screw it tight.
- Secure the connector with electrical tape or heat shrink tubing.
Powering Your Tape Lights
Once your tape lights are connected, it's time to power them. You'll need a appropriate power supply unit (PSU) that matches the voltage and amperage of your lights.
To connect your tape lights to the PSU, follow these steps:
- Strip off about 3/4" of the adhesive backing and copperfoil at the power end of your tape lights.
- Plug in the power supply unit and turn off the power at the mains.
- Connect your lights to the PSU using the appropriate connecting leads.
- Turn on the power at the mains and flick your lights on.
Testing and Troubleshooting
After turning on your tape lights, ensure they're allworking. If a section is dark, check the following:

- Ensure the connections are solid, with no exposed copperfoil.
- Check for any breaks or splits in the tape light.
- Ensure the power supply unit is adequate for your lights.
Pro Tip: Always start with a test run on just a few feet of tape lights before connecting your entire system.This can help you troubleshoot any issues before committing to a larger installation.
With your tape lights now connected and shining brightly,you can sit back and enjoy the warm, inviting ambiance theycreate. Happy lighting!





