How to Change Trim Around Garage Door
Have you ever noticed the trim around your garage door and wondered how it got there or, more importantly, how you could replace it? Trim around garage doors serves an essential purpose, providing a smooth transition from the door to the frame and enhancing the overall aesthetics of your garage. If your trim is damaged, worn, or simply outdated, it's time to learn how to change it. Here's a comprehensive guide to help you through the process.
Before we dive into the steps, let's highlight some safety precautions and necessary tools. This job involves basic DIY skills and requires tools like a drill, screws, and a few other common items. We'll also cover when to call a professional for assistance. Make sure to read through the entire guide before you start to ensure you have all the necessary tools and knowledge.
Assessing Your Garage Door Trim and Choosing Replacements
Start by examining your current trim. Determine the material (vinyl, wood, or composite) and take note of its dimensions. If your trim is rotted, cracked, or missing, it's best to replace the entire piece. Measure the length and width of the trim sections, including both sides and the header. Knowing these dimensions will help you purchase the correct replacement pieces.



Once you've measured, decide on the new material. Many homeowners opt for vinyl due to its durability, low maintenance, and affordability. Wood and composite materials are also options, offering a natural look and varying degrees of maintenance.
Gathering Necessary Tools and Materials
To change the trim around your garage door, you'll need the following tools and materials:



- Replacement trim pieces (matched to your measurements)
- Cordless drill and screwdriver bits
- Level
- Tape measure
- Safety glasses
- Work gloves
- Fine-grit sandpaper
- Pry bar (optional, for removing old trim)
- Caulk gun and paintable exterior caulk
- Paint or stain (matching your current trim or desired finish)
Removing the Old Garage Door Trim
Start by disconnecting the garage door opener to ensure safety while working. Next, gently pry the old trim away from the garage door frame using a pry bar, if necessary. Once the trim is loose, unscrew it and remove it. If the trim is stuck or damaged, it may need to be broken or cut away using a saw.
After removing the old trim, clean the area thoroughly with a wire brush or pressure washer to remove debris and ensure proper adhesion of the new trim. Always wear safety glasses and gloves during this process to protect yourself from debris and sharp edges.
Installing New Trim Around Your Garage Door
With the old trim removed and the area cleaned, you're ready to install the new trim pieces. Begin with the header, which is the horizontal piece at the top of the garage door. Hold the header in place and use a level to ensure it's straight. Once you're satisfied with the positioning, mark the desired locations for the screws.






Drill pilot holes at your marked locations and secure the header with screws. Repeat this process for the side and bottom trim pieces, ensuring they are all level and flush with the garage door frame. Take your time to ensure a clean, professional appearance. If you notice slight gaps, don't worry – these will be filled with caulk in the next step.
Finishing Touches – Sealing and Painting
Once the new trim is secured, it's time to fill any gaps or cracks with paintable exterior caulk. Use a caulk gun to apply a beads along the seams where the trim meets the garage door frame. Smooth the caulk with your finger or a damp cloth to create a clean, finished look. Allow the caulk to dry according to the manufacturer's instructions before proceeding.
Finally, paint or stain your new trim to match your desired finish. If you're painting, choose a weather-resistant exterior paint and apply two coats for optimal protection. Allow the trim to dry completely between coats.

Congratulations, you've successfully changed the trim around your garage door! Regularly inspect your new trim for signs of damage or wear, and touch up the paint or stain as needed to maintain its appearance. If you encounter any issues during the process or feel uncomfortable attempting this project, don't hesitate to call a professional for assistance.



