How to Build a Double Wooden Fence Gate: A Step-by-Step Guide
Boost your property's curb appeal and security with a stylish double gate for your wood fence. This guide will walk you through the process, from planning to completion, ensuring your new barriers not only look fantastic but also function perfectly.
Before you start, ensure you have the necessary tools and materials: wood suitable for outdoor use, screws, hinges, latches, drill, saw, level, tape measure, and safety gear. Let's dive into the step-by-step guide to building a double gate for your wood fence.
Design and Measurement
The first step is to decide on the design that complements your fence. Consider the width of your driveway or path for the double gate. For this guide, we'll assume a standard 12-foot wide gate opening, with each single gate at 6 feet wide.



Measure the height of your fence and add an additional 12 inches for the gate to clear the fence post. This will give you the total height you need for your gate. Ensure you have sufficient material and consider the weight of the gate, as heavier gates may require sturdier support posts.
Create Your Gate Frame
Cut four 2x4s to the width of your single gate (6 feet) for the top and bottom horizontal rails. Cut two more 2x4s to the height of your gate, including the 12-inch clearance (around 4 feet), for the vertical posts. Assemble the frame using pocket hole screws or simple butt joints, ensuring the frame is square.



Cut two 4x4 gate posts to the height of your fence plus 12 inches for clearance. Attach these posts to the inside of your gate frame using screws, ensuring they're plumb and well-supported. This will create a robust frame for your gate.
Attach Gate Slats
Using 1x4 or 1x6 boards as slats, space them evenly on your gate frame. Secure them with 1⅝-inch exterior-rated screws, leaving a ⅛-inch gap between each slat for drainage and expansion. Ensure your slats follow the design you've chosen, creating a visually appealing pattern.
For added style, you can also add optional diagonal braces or cross-beams to your gate. Just remember to keep the design balanced and functional.






Hang Your Double Gate
Before hanging your gates, install the latch hardware on the interior side of the gate posts. Align the latch with the fence post for a smooth closing action.
Position your double gate in the opening, ensuring it aligns with the fenceposts. Use a level to ensure the gate hangs plumb. Mark the locations for your hinge mounting screws through the hinge plates.
Attach Gate Hinges
Remove the gate from the opening and attach the hinge plates to the fence post using the marked locations. Ensure the hinge is level and plumb before securing it with screws.

Rehang the gate and attach the other side of the hinge to the gate post. Ensure the gate swings freely and closes smoothly against the latch. Adjust your gate as needed until it operates perfectly.
Add Finishing Touches
Once satisfied with the gate's operation, paint or stain your double gate to match your fence and protect it from the elements. Allow the gate to dry completely before use.
Now that your double gate is complete, it's time to enjoy the enhanced curb appeal and security it brings to your property. Regular maintenance, such as checking for loose screws and painting or staining as needed, will keep your gate looking and functioning great for years to come.
Embrace the sense of accomplishment that comes with completing a DIY project and consider tackling other outdoor improvement tasks. Who knows, you might even inspire your neighbors to upgrade their own fences!





