Step-by-Step: Build an Outdoor Brick Fireplace
Building an outdoor brick fireplace can significantly enhance your outdoor living space, providing both warmth and a charming focal point. This step-by-step guide will walk you through the process, from planning to completion, ensuring you create a safe, functional, and visually appealing fireplace.
Before you start, ensure you understand local building codes and obtain any necessary permits. Additionally, it's crucial to choose a location for your fireplace that's at least 25 feet away from any structures and up to applicable fire safety codes. Don't forget to ensure your chosen spot is level and well-draining.
Planning and Gathering Materials
begin by sketching out your design. Consider the size, style, and features you want, such as a seating area, mantel, orintegrated cooking grate. Simple designs, like square or rectangular fireplaces, are easiest for beginners.



Once you've decided on the design, gather your materials. You'll need:
- Fire bricks and regular bricks
- Mortar
- Reinforcement bars (rebar)
- Fire-resistant mortar
- Sand
- Gravel
- Bricklaying trowel
- amental level
- Gloves and safety glasses
Preparing the Base
Start by preparing the base of your fireplace. Dig a hole about twice the width and depth of your desired fireplace, then fill it with a layer of gravel for drainage. Top the gravel with a layer of sand, ensuring both layers are level.



Next, build a landing pad using regular bricks and mortar. This pad will support the weight of your fireplace and help to prevent water damage. Make sure it's slightly smaller than the footprint of your fireplace to allow for expansion and contraction.
Laying the First Course
Before you begin, ensure your fire bricks are soaked in water to help contain heat and prevent cracking. Lay your first course of fire bricks, using fire-resistant mortar and ensuring they're level. This course forms the bottom layer of your firebox, where the flames will burn.
Include a notch in the center of this first course for your grate or andirons. Also, consider adding metal support rods at each corner for additional reinforcement.






Building the Firebox and Chimney
The firebox is the inner chamber where the fire burns. It needs to be at least 18 inches wide, 16 inches deep, and 12 inches high to provide sufficient space for wood and flames. Ensure you're maintaining these measurements as you build upwards.
For a basic design, use fire bricks for the first 8-10 inches above the base, then switch to regular bricks for the remainder. This helps to moderate the heat and prevent excessive cracking of the more expensive fire bricks.
Constructing the Layers
As you build upwards, stagger the joints between bricks in each course to create a stronger structure, much like laying courses of stacked stones. Use your trowel to craft interlocking joints for better adhesion and stability.

Every 6-8 courses, build a layer of quoins around the top of your firebox. These are corner bricks that extend beyond the wall, strengthening the structure and providing a flat surface for laying the next course.
Adding the Smoke Shelf and Damper
Around 6 inches below the top of your firebox, install a smoke shelf using fire bricks. This shelf helps to direct smoke and gases up the chimney. install a damper nearby, which will help regulate airflow and control the heat within your fireplace.
Above the smoke shelf, continue building the walls of your chimney. Remember, the chimney should be at least 12 inches smaller in width and depth than your firebox, to help draw smoke upwards and out of your fireplace.
Finishing Touches and Safety Precautions
Once your fireplace is complete, apply a layer of fireproofing material, like a refractory cement, to the interior of your firebox. This helps protect the bricks and mortar from heat and corrosion.
Before using your new fireplace, ensure it's been properly cured. Allow the mortar to cure for at least 72 hours, then apply a small amount of heat, gradually increasing the temperature over several days, to season your bricks.
Regular Maintenance
To keep your outdoor brick fireplace in top condition, regularly inspect it for cracks or damage. Clean the chimney to remove debris and creosote, which can cause chimney fires. Maintain a safe distance from the fireplace when in use, and always extinguish fires completely before leaving or going to sleep.
With proper care and maintenance, your outdoor brick fireplace will provide years of enjoyment, serving as a warm and inviting gathering spot for friends, family, and memorable moments.





