Wooden Window Planter Box DIY: Step-by-Step Guide
Adding greenery to your home not only enhances its aesthetic appeal but also improves indoor air quality. A wooden window planter box is an excellent DIY project that combines functionality and style. In this comprehensive guide, we'll walk you through the process of building a wooden window planter box step by step.
Before you start, ensure you have all the necessary tools and materials. You'll need basic woodworking tools, and for this project, we'll use cedar wood, which is naturally rot-resistant and safe for plants. Let's dive into the project.
Planning Your Window Planter Box
The first step in building your window planter box is planning its size and design. Measure your window's width and depth, then decide on the height of your planter. Remember, the box should fit snugly in your window to provide adequate support for your plants.



We recommend a depth of 6-8 inches for most plants. As for width, a good rule of thumb is to match your window's width or make it slightly narrower for a snug fit. For this guide, we'll build a box that's 8 inches deep, 36 inches wide, and 10 inches high.
Materials Needed
To build a planter box of these dimensions, you'll need:



- Three 8-foot long, 1x6 cedar boards
- One 8-foot long, 1x4 cedar board
- 1-1/4 inch galvanized exterior screws
- 2-1/2 inch galvanized exterior screws
- 2-1/2 inch exterior wood glue
- Sandpaper (120-grit)
- Finishing nails (optional, for decorative trim)
- Exterior wood sealer or paint (optional)
Tools Required
You'll also need the following tools:
- Tape measure
- Pencil
- Saw (circular saw, miter saw, or handsaw)
- Drill with driver bits
- Pocket hole jig (optional, for strength and hidden connection)
- Clamps
- Safety gear (safety glasses, ear protection, dust mask)
Constructing the Window Planter Box
Now that you have all the materials and tools, let's start building your planter box.
Cutting the Boards
Using your saw, cut the cedar boards according to the following measurements:






From the 1x6 boards (3 pieces):
- Two pieces at 36 inches (length)
- One piece at 10 inches (height)
From the 1x4 board (2 pieces):
- Two pieces at 8 inches (depth)
Assembling the Box
Apply wood glue along the length of one of the 36-inch pieces and along the width of one of the 8-inch pieces. Align these pieces to form a corner, then use clamps to secure them together. Allow the wood glue to dry according to the manufacturer's instructions.

Once the glue is dry, drill pilot holes and use 1-1/4 inch screws to further secure the joint. Repeat this process with the remaining corners.
With all the corners assembled, attach the remaining 36-inch piece at the bottom of the box using 2-1/2 inch screws.
Adding the Back Support and Trim
Stand the planter box up and measure and cut the 10-inch piece to fit as the back support. Attach it using wood glue and 1-1/4 inch screws.
Optionally, you can add decorative trim pieces to the top and bottom edges for a finished look. If so, measure and cut the trim pieces, and attach them using finishing nails.
Finishing Touches
Once your planter box is fully assembled, it's time to give it a finished look and protect it from the elements.
Sand and Seal
Use sandpaper to lightly sand any rough edges or surfaces. Wipe away the dust, then apply an exterior wood sealer or paint to protect your planter box from moisture and sun damage.
Installing the Planter Box
Measure the width of your planter box and mark the positions for screws on your window outer frame. Pilot drill holes into the window frame, then attach the planter box using screws that won't be visible once installed.
Congratulations! Your wooden window planter box is now ready to be filled with soil and plants. Enjoy your new greenery and the improved air quality it brings to your home.





