How to Build a Simple Shed Ramp: Step-by-Step Guide
Building a simple shed ramp can greatly enhance accessibility and usability of your shed, especially if you're using heavy equipment or need wheelchair accessibility. This guide will walk you through the process, ensuring your ramp is safe, sturdy, and compliant with ADA guidelines. With the right tools and materials, you can complete this project in a weekend.
To ensure your ramp is code-compliant and long-lasting, it's essential to plan it carefully. A common practice is to have a ramp with a maximum rise of 30 inches, a slope no greater than 1:12, and treads at least 48 inches deep. Always check your local building codes for specific regulations in your area.
Gathering Materials and Tools
Before you start, assemble all necessary materials and tools to streamline the process. You'll need:



- Pressure-treated lumber (2x6 and 4x4-inch) for the ramp frame and treads
- Deck screws (2-1/2" and 3-1/4")
- landscaping fabric
- Gravel or crushed stone
- Construction adhesive
- Level and carpenter's square
- Tape measure and pencil
- Saw (circular or hand saw)
- Power drill and driver bits
- Safety equipment (gloves, goggles, ear protection)
Planning Your Ramp Layout
Measure the height from the ground to the shed's floor and determine the ramp's length based on the desired slope. Use a calculator or online ramp calculator to find the ideal length for your ramp's height and 1:12 slope.
Mark out the ramp location from the shed door to the ground using stakes and string. This will serve as your guide during construction.



Building the Ramp Frame
Start by cutting your 2x6-inch lumber into 48-inch sections for the treads. Use these as templates to mark the 12-inch spacing on your 2x6-inch stringers. Cut your stringers to length based on your ramp's plan.
Assemble the ramp frame using 2-1/2" deck screws. Start at the bottom, laying two stringers parallel to each other, 12 inches apart. Place a tread across the top, ensuring it's level. Repeat this process, staggering the stringers for added strength, until you've reached the top of the ramp.
Installing the Ramp Treads
Once the frame is secure, install the treads. Begin at the bottom, measuring 1/2" from the front of the stringers to account for expansion. Attach the first tread using 3-1/4" deck screws, driving them through the stringers and into the tread.






Continue attaching treads, working your way up the ramp. Ensure each tread is level and properly spaced. Secure each tread with at least two screws in each stringer.
Securing the Ramp to the Shed
For added stability, secure the top of the ramp to the shed. Drill pilot holes through the stringers and into the shed's floor joists. Use 3-1/4" deck screws to attach the ramp to the shed, ensuring it won't shift or move.
Additionally, you can stake the ramp to the ground using rebar or steel stakes. Drive these into the ground at the bottom of the ramp, securing it further.

Finishing the Ramp Surface
Lay landscaping fabric over the ramp, securing it to the stringers with construction adhesive. This will help prevent weed growth and keep the ramp clean. Then, spread a layer of gravel or crushed stone over the fabric, filling the entire ramp surface.
Gently rake the aggregate into the treads, filling any gaps and providing a non-slip surface. Allow the gravel to settle, then add more if necessary. Trim any excess landscaping fabric.
Your new shed ramp is now complete, providing safe and easy access to your storage space. Regularly check the ramp for any signs of wear or damage, and make repairs as needed to ensure its longevity. Enjoy the convenience and versatility that your new ramp offers!





