How to Build a Shower Niche with Cement Board
Building a shower niche with cement board is a practical and durable way to enhance your bathroom's functionality and aesthetic appeal. This guide will walk you through the process, from planning to completion, ensuring an optimal result that will withstand the test of time.
Cement board, known for its durability and resistance to moisture, is an excellent choice for shower niches. It not only provides a solid base for tiles but also prevents mold and rot, making it a long-lasting solution for your bathroom.
Gather Materials and Tools
Before you begin, gather all necessary materials and tools to ensure a smooth workflow. Here's a list to get you started:



Materials: Cement board, mortar, adhesive, tile, grout, silicone sealant. Tools: Tape measure, utility knife, trowel, notched trowel, grout float, bucket, safety gear (safety glasses, gloves).
Plan Your Niche
First, decide on the size and location of your niche. Standard niches are around 15 inches deep by 16 inches wide but can be customized based on your preference and shower wall size. Sketch a plan including exact measurements to guide your installation.



Consider the placement of your niche in relation to your shower fixtures, such as the showerhead and faucet, to ensure accessibility and convenience during use.
Install the Framework
Use the sketch you created to mark and cut your cement board to size. A utility knife is ideal for this task. Ensure the cuts are straight and clean to create a neat, professional-looking niche.
The framework of your niche should be made from waterproof materials. Consider using copper or PVC pipes or a prefabricated niche kit for the support structure. Secure the cement board to this framework using waterproof adhesive and screws.






Prepare the Surface and Apply Mortar
Clean the wall surface thoroughly to remove any dirt or debris that could interfere with the adhesive. If needed, ensure the wall is even and well-supported.
Mix your mortar according to the manufacturer's instructions. Using a notched trowel, apply a layer of mortar to the wall, covering the entire area where your niche will be located. Work quickly and evenly to ensure optimal adhesion.
Install the Cement Board
Press the cement board firmly against the mortared wall, ensuring it's level and aligned with your planned niche dimensions. Use spacers or a trowel to create the desired depth. Secure the board temporarily with clamps or weights to allow the mortar to set.

Apply mortar to the back of the niche frame and press it firmly into place. Verify that it's level and aligned before leaving it to set. Remove the temporary clamps or weights after the mortar has set slightly to avoid damaging the wall.
Seal the Edges and Fill in the Niche
Seal the edges of the niche with a silicone sealant to prevent water or moisture from penetrating and causing damage. Allow the sealant to dry completely before proceeding.
Mix and apply more mortar to fill in the niche, ensuring a smooth and even surface for tiling. Smooth out any uneven areas and allow it to dry according to the manufacturer's instructions.
Tile and Grout
Once the mortar has dried, you can begin tiling your niche. Start from the center and work your way outwards to ensure a straight and even line. Use spacers to maintain consistent spacing between tiles and a level to ensure each row stays straight.
After tiling, allow the mortar to cure for the recommended time. Then, apply grout using a grout float, working diagonally to ensure full coverage and forcing the grout into the joints. Clean any excess grout from the tile surface.
Seal and Maintain Your Shower Niche
Once the grout has cured, seal your niche with a grout sealer to protect it from moisture and stains. Apply the sealer evenly, following the manufacturer's instructions. Allow it to dry completely before using your shower again.
Maintain your shower niche by regularly cleaning it to prevent grime build-up. Use gentle cleaning solutions to avoid damaging the grout or sealant. Inspect your niche periodically for any signs of wear or damage and address them promptly to ensure its longevity.
Building your own shower niche with cement board is a rewarding task that not only enhances your bathroom's functionality but also improves its aesthetic appeal. With careful planning and execution, your DIY niche will serve you well for years to come. Consider your options for customizing your niche, such as different tile patterns or built-in shelves, to create a unique space that truly reflects your personal style.



