PVC Pool Cover Reel DIY: How to Build Your Own Easy & Cheap
Diving into the summer months always brings the joy of lounging by the pool, but maintaining its cleanliness can be a hassle. Enter the pool cover reel, an effective solution to keep your pool water pristine and reduce evaporation. By building your own from PVC pipe, you'll not only save money but also customize it to fit your pool's unique shape and size. Let's delve into a comprehensive guide on how to construct this practical accessory.
Before we begin, ensure you have basic tools and safety gear at hand, such as gloves, safety glasses, tape measure, marker, saw, PVC cement, PVC primer, clamps, and elbow, tee, and 4-way connectors. Now, let's roll up our sleeves and get started!
Planning and Measuring
The first step is to measure and plan the reel's dimensions to suit your pool. Consider the total length of your pool cover and add 3 inches to each side to ensure adequate space for winding. Next, determine the ideal height for the reel. It should be tall enough to accommodate the pool cover's thickness plus a few inches for easy winding and unwinding.



Once you've taken measurements, create a simple sketch outlining your reel's dimensions, including the length, height, and width. This blueprint will guide you through the assembly process.
Gathering PVC Materials
With your measurements in hand, calculate how much PVC pipe and connectors you'll need. A common reel configuration uses 3.5-inch diameter pipe for both the upright and cross-sectional pieces. For the axle, opt for a 1.5-inch diameter pipe long enough to extend beyond the reel's width by a few inches on each side.



Based on your sketch, list the required PVC lengths and connectors, ensuring you have enough PVC cement and primer for gluing.
purchasing PVC materials
Before making your purchases, check home improvement stores, hardware stores, and online retailers for prices and availability. Consider buying slightly more material than needed to account for any cutting or connecting errors.
Don't forget to factor in the cost of additional necessary materials, such as end caps, support brackets, screws, and bolts, to complete your reel.






Cutting PVC Pieces
After gathering your materials, it's time to cut the PVC pipes according to your measurements. Use a hacksaw or PVC pipe cutter, ensuring each piece is precise and even for a smooth assembly.
Given the various sizes and connector pieces, you'll need to cut lengths for:
- The axle (2 pieces)
- The uprights (4 pieces)
- The cross-sectional pieces (4-6 pieces, depending on your design)
Assembling the Pool Cover Reel
Now that you have all the cut PVC pieces and connectors, it's time to assemble the reel. Use PVC primer and cement to create strong bonds between the pipes and connectors. Always allow the primer to dry for a few seconds before applying the cement.

Start by connecting the four upright pieces with an elbow connector at the top and bottom, forming a rectangle. Then, attach the axle pieces to the elbow connectors using tee connectors, ensuring they extend beyond the width of the reel.
Adding Cross-sectional Pieces
Attach the cross-sectional pieces to the uprights using tee connectors, spacing them evenly apart to support the pool cover. Ensure the axle runs through the center of these pieces, allowing the reel to rotate smoothly.
Connect four-way connectors to the top and bottom of the upright pieces, creating mounts for the support brackets that will secure the reel to the pool deck.
Finishing Touches
Once the basic structure is assembled, attach end caps to the exposed ends of the axle pipes to prevent debris from entering the reel. Next, install the support brackets by drilling holes through the four-way connectors and attaching them to the pool deck using screws or bolts.
Finally, test the reel by winding and unwinding the pool cover to ensure it rotates smoothly and securely.
Maintaining and Storing Your Pool Cover Reel
To maintain your DIY pool cover reel, clean it periodically with warm water and a mild detergent, then rinse and dry thoroughly. this helps prevent mold, mildew, and rust from forming on the PVC surfaces.
When not in use, store the reel in a dry place, such as a garage or shed, to protect it from harsh weather conditions. If outdoor storage is unavoidable, consider covering it with a tarp or purchasing a specialized cover for added protection.
With your new pool cover reel in place, you're well on your way to enjoying a clean and well-maintained pool all year round. Happy swimming, and remember to prioritize safety around the water!





