How to Build a Lazy Susan for Your Kitchen Cabinets
Transforming your kitchen cabinets into space-saving marvels is a breeze with a lazy susan. This versatile, rotating shelving system not only adds a touch of style but also maximizes your storage space. If you're wondering how to build a lazy susan kitchen cabinet, you're in the right place. This step-by-step guide will walk you through the process, ensuring you create a functional and aesthetically pleasing addition to your kitchen.
The lazy susan kitchen cabinet isn't just a trend; it's a lifesaver for small spaces and busy families. With proper planning and the right tools, you can build one tailored to your kitchen's unique layout. So, let's dive in and make your kitchen cabinets work harder for you.
The Perfect Lazy Susan Size
Before you start, decide on the size of your lazy susan. The ideal size depends on the size of your cabinet and the items you want to store. Typically, a lazy susan should be slightly smaller than the cabinet's width to allow for easy rotation and access to items at the back.



Measure your cabinet's width and depth, then subtract about 1 to 2 inches from each dimension. This will give you the ideal size for your lazy susan. For example, if your cabinet is 36 inches wide and 24 inches deep, your lazy susan should be around 34 to 35 inches wide and 22 to 23 inches deep.
Materials Needed
Now that you have your measurements, gather the necessary materials. Here's a list to help you:



- Plywood (1/2" or 3/4" thick, depending on your cabinet's depth)
- 2x4 lumber for the frame and support
- Pocket hole screws
- Wood glue
- Barn door hardware (lazy susan bearing kit)
- Screws (1-1/4", 2", and 2-1/2" based on the kit's requirements)
- Sandpaper (120-grit)
- Paint or stain (optional, for finishing)
Tools Required
Here's a list of tools you'll need for this project:
- Tape measure
- Circular saw
- Drill
- Pocket hole jig
- Sandpaper (120-grit)
- Screwdriver or impact driver
- Level
- Pencil
- Clamps
Building the Lazy Susan Base
With your materials and tools ready, let's start building the lazy susan base. This is the rotating part that will hold your items.
First, cut your plywood to size based on the measurements you took earlier. If you're using 1/2" plywood, you might want to add a supportive frame around the edge to prevent warping. You can cut 2x4 lumber to size and attach them to the edges using wood glue and pocket hole screws.






Installing the Bearing Kit
Once the base is ready, it's time to install the bearing kit. Most kits come with hardware for both left and right-handed cabinets. Choose the correct hardware based on your cabinet's opening direction. Here's a simple step-by-step guide:
- Mark the center of your lazy susan base and the cabinet's bottom shelf where you want the bracket to attach.
- Attach the bracket to the bottom shelf using screws. Make sure it's level and centred.
- Position the lazy susan base on top of the bracket and mark the holes where you'll attach the pivot arm.
- Remove the lazy susan base and drill pilot holes through the marked spots.
- Re posicion the lazy susan base on top of the bracket, align the pivot arm, and attach it to the base using screws.
Final Touches and Installation
Before installing the lazy susan into your cabinet, sand any rough edges and finish it with paint or stain according to your preference. Once dry, it's time to install it in your cabinet.
Carefully lift the lazy susan into place, aligning it with the bracket on the cabinet's bottom shelf. Secure it by tightening the screws on the pivot arm. Ensure it spins freely and smoothly. If it's too tight, you might need to sand the sides of the lazy susan or adjust the pivot arm's tension.

Test and Enjoy
Now that your lazy susan kitchen cabinet is complete, give it a test spin. It should rotate smoothly, allowing you to access all your items with ease.
Your kitchen just got a whole lot more functional and organized. Enjoy your newly found storage space and the satisfaction of a DIY job well done!





