Step-by-Step Guide: Building a Lattice Garbage Can Enclosure
Transforming an ordinary garbage can into a stylish and functional part of your outdoor space is easier than you think. Building a lattice garbage can enclosure not only adds elegance but also provides a shield from curious critters and unsightly cans. Let's dive into the process of creating this DIY project that enhances your backyard appeal.
Before we begin, gather your materials. You'll need wooden lattice, exterior paint or stain, a saw, screws, drill, level, measuring tape, and of course, your garbage can. Also, ensure you have a comfortable and well-lit workspace, as you'll spend a few hours on this project.
Planning and Design
First, decide on the size and design of your lattice enclosure. Eight feet tall and three feet wide should accommodate most standard garbage cans. As for design, rectangular or square shapes are classic choices, but you can also create an octagonal or circular enclosure to fit your space's aesthetics.



After sketching your design, calculate the dimensions and number of lattice panels you'll need. Also, decide on the placement of your enclosure, ensuring it's near your house for easy access and connection to utility services.
Cutting the Lattice Panels
Measure and mark your cuts on the wooden lattice using a pencil and measuring tape. Then, use a saw or jigsaw to cut along the lines, creating a puzzle-like assembly of panels. If you've chosen a circular design, you may need to cut some panels into trapezoid shapes.



For added efficiency, cut all panels at once to minimize waste and ensure consistency in dimensions. Once cut, lay out the panels in your desired design to verify they fit together as expected.
Painting or Staining the Lattice
Before assembling the enclosure, apply paint or stain to the lattice panels. This step is easier before assembly, allowing you to reach all sides and surfaces. Choose a color that complements your outdoor space, or consider using a translucent stain for a more natural wood grain appeal.
Allow sufficient drying time between coats and apply a sealant for added protection against the elements. Now that your panels are beautifully colored and protected, it's time for assembly.






Assembling the Lattice Enclosure
Begin by screwing two side panels together, ensuring they're level and plumb. Place this assembly on a stable, flat surface, like your backyard deck or driveway. Then, screw the back panel to the assembly, forming a U-shape.
Next, measure and cut any necessary angle pieces or trim to connect the back and side panels. Attach these pieces, creating a continuous, enclosed strip around the trash can. Now, you can install the front panels, allowing them to fold open for access to the garbage can.
Installing the Hinges
Attach hinges to the side panels, positioning them so the front panels swing open freely. You may need allyourself a helper for this step, as holding the front panels in place while screwing can be challenging alone.

Once the hinges are secure, double-check that the front panels open and close smoothly. Make any necessary adjustments, and ensure the enclosure isn't blocking access to the garbage can's lid.
Finishing Touches
If desired, add extra decorative elements to your lattice enclosure. This could be flowers along the base, ivy climbing the sides, or even a small solar light for nighttime visibility. Ensure any additions are secure and won't interfere with the enclosure's operation.
Finally, place your garbage can inside the enclosure, and step back to admire your handiwork. Your backyard has a beautiful, inviting focal point that's functional too!
Now that your lattice garbage can enclosure is complete, consider incorporating it into your landscaping plan. Plant flowers around the base or use it as a backdrop for a cozy seating area. With a little creativity and elbow grease, your garbage cans can become a stylish addition to your outdoor space. Happy crafting!





