Build An Inset Bath Frame: Step-by-Step Guide
Building an inset bath, also known as a recess bath, can transform your bathroom into a sleek, modern space. This type of bath sits flush with the wall, creating a seamless, continuous surface. Here's a comprehensive guide on how to build a frame for an inset bath, ensuring safety and stability.
Before you start, ensure you have the necessary tools and materials: a tape measure, pencil, saw, level, support joists, waterproof board, and screws suitable for the material of your joists. Always work with a partner for safety and to ensure precision.
Planning and Preparation
Proper planning is crucial to ensure your inset bath sits securely and level. Start by measuring the space where your bath will be installed. Consider the standard size of inset baths, usually 1700mm x 700mm, but double-check measurements to ensure a perfect fit.



Inspect the wall and floor where the bath will be located. Inset baths require a solid, level surface with appropriate support. If necessary, install or reinforce support joists to ensure your bath sits securely.
.markupating the Bath Area
Mark out the perimeter of your bath on the wall and floor using a pencil and your measurements. Include the width and height of the bath, ensuring it's level and square.



Use a level to ensure your lines are horizontal and vertical. Ask a helper to hold the level against your marks to double-check for accuracy.
Constructing the Bath Frame
Begin building your bath frame using the support joists. Attach the joists horizontally along the length of the bath, securing them to the studs or existing frame with appropriate screws or nails. Ensure each joist is flush with your marked lines and level.
Next, install vertical joists on either side of the bath to support the width. These should also be level and flush with your marks. Secure them to the horizontal joists and the wall frame using appropriate fasteners.






Waterproofing and Finishing
Before installing the bath, it's crucial to waterproof the surrounding area. This prevents moisture from damaging the frame and potentially causing leaks or mold.
Apply a generous layer of waterproof membrane, ensuring full coverage over the frame and slightly up the adjacent walls. Allow this to dry completely before proceeding.
Installing the Bath
With your frame securely built and waterproofed, it's time to install the inset bath. Place the bath into the frame, ensuring it's level and sits squarely against the walls.

Secure the bath in place using screws, following the manufacturer's instructions. Ensure these screws are fully waterproofed to prevent future issues. Once secure, you can begin tiling or installing the surrounding finishes.
Final Touches
After tiling and grouting, allow everything to dry completely. Test your bath by filling it with water, checking for any leaks or issues. If all is well, congratulate yourself on a job well done! You've successfully built a secure, beautiful inset bath.
Remember, maintaining your bath and surrounding area is essential to keep it looking and functioning at its best. Regularly check for signs of wear or damage, and address any issues promptly to ensure your inset bath continues to be a stunning feature of your bathroom.





