How to Build a Fence on Top of a Wood Retaining Wall
Building a fence on top of a wood retaining wall can significantly enhance your property's privacy, aesthetics, and functionality. This step-by-step guide will walk you through the process, from planning to completion, ensuring your fence stands strong and lasts for years to come.
Before you start, ensure you have the necessary permits, understand your property lines, and know what kind of fence you want. This article focuses on building a simple, cost-effective wooden picket fence. Let's dive in!
Preparation and Planning
The key to a successful project is thorough preparation. Start by selecting the right materials. Pressure-treated lumber is ideal for the posts, as it's resistant to rot and decay. For the fence itself, you can use cedar or redwood, which are naturally durable and have a beautiful finish.



Next, gather your tools: post hole digger, level, circular saw, drill, tape measure, and gloves. Also, have a helper on hand; building a fence is a two-person job in many instances.
Measuring and Planning the Layout
Start by determining the length of your fence and how many posts you'll need. A typical picket fence uses posts spaced 6-8 feet apart. Using a tape measure, mark these intervals along your retaining wall. Mark where you'll cut the posts to ensure they're level with the top of the wall.



Measure twice, cut once to ensure accuracy. Plan the layout of your fence panels, deciding where gates and arched openings will be located.
Preparing the Posts
Cut your posts to the correct height using a circular saw. The top of each post should be level with the top of the retaining wall. Mark the depth you'll need to bury your posts. A common depth is one-third to one-half the post's length, ensuring stability.
Drill holes at the top of each post to accommodate the fence rails, Daughter-track screws or bolts, and the brackets that will secure the fence to the wall.






Installing the Posts
With your posts prepared, it's time to set them in place. This is where a helper comes in handy. Using a post hole digger, dig holes at your markings, ensuring they're straight and the right depth.
Place a post in each hole, ensuring it's plumb (perfectly vertical). Brace the post with a piece of wood and some screws if needed. Once all posts are in place, mix and pour concrete into each hole, filling to just below ground level. Allow the concrete to cure according to the package instructions.
Installing the Rails and Pickets
Start by installing the top and bottom rails. These should sit flush with the top of the posts. Use the predrilled holes to secure the rails with the screws or bolts. Ensure the rails are level and the fence is square.

Now, install the fence pickets. Most picket fences have 2-3 pickets between each post. Measure and mark the location of each picket. Use the predrilled holes to secure them with nails or screws. Ensure they're level and plumb.
Securing the Fence to the Wall
Cut brackets or buy pre-made ones to secure the fence to the retaining wall. Attach these brackets to both the top and bottom rails and to the wall itself. Ensure they're level and secure.
If you've planned gates or arched openings, measure and cut the pickets and rails accordingly. Install any hardware for latch mechanisms or hinges. Ensure gates swing freely and secure them properly.
Step back and admire your handiwork! Regularly inspect and maintain your fence to ensure its longevity. A simple annual staining or sealing will help protect it from the elements and keep it looking great.



