How to Build a Brick Bird Bath
Transform your backyard into a serene sanctuary with a beautifully crafted brick bird bath. Not only will a handmade bird bath attract vibrant feathered friends, but it also adds an elegant touch to your outdoor space. If you're a DIY enthusiast with basic masonry skills, follow our step-by-step guide to create a stunning brick bird bath.
Before you start, ensure you have the right tools and materials. You'll need bricks, mortar, a trowel, brick level, tape measure, frogging tool, gloves, goggles, sand, and water. Additionally, consider the design and size to fit your garden aesthetics. Here's how to get started.
Planning and Design
First, visualize your bird bath design. Simple basin shapes work best for beginners – consider a basic round or square basin. Measure the dimensions, ensuring the base is larger than the basin to provide stability. Once you have a design in mind, sketch it out or find a simple plan online to use as a reference.



Choose your bricks wisely. Regular old bricks work fine, but consider buying new ones with consistent sizing for a more polished look. You'll also need sand for creating your mortar mix. High-quality sand provides better adhesion, ensuring your bird bath stands the test of time.
Setting Up Your Workspace
Choose a flat, stable surface to build your bird bath. Concrete slabs or a large piece of plywood work well. Place the base bricks on your workspace, following your design layout. Make sure to leave enough space for the basin.



Lay out the bricks for the base, ensuring they're level. Use a tape measure to check each dimension, adjusting as needed. This step is crucial for creating a stable foundation for your bird bath.
Mixing Mortar
The secret to a strong bird bath is a well-mixed mortar. Blend 6 parts by volume of sand with 1 part cement. Gradually add water, mixing until you achieve a consistency similar to thick mud. Remember, adding too much water weakens the mortar, so go sparingly.
A(params for mortar) tihis stage, don your safety gear: gloves, goggles, and long sleeves. Mortar can be messy and protects your skin and eyes from irritation.






Building the Base
Start at the bottom of your design, applying a 1-inch layer of mortar onto the first base brick. Use the frogging tool to create vertical ridges, enhancing the mortar's gripping power. Place the next brick on top, pushing it firmly into the mortar.
Repeat this process, working around the base, ensuring each brick is level and properly aligned. Use the brick level to check and adjust as you go. Once done, allow the mortar to set for at least 24 hours before starting the next step.
Building the Walls
Begin constructing the walls using the same method. Start from the base and work your way up. Ensure the walls are vertical and square by using a spirit level and measuring as you go. Each course should be staggered, with joints half-width offset from the course below for added strength.

Apply mortar to three-quarters of the height of the desired wall at a time. This way, you can efficiently work on vertical sections and maintain the structure's integrity. Keep checking for level and square as you build.
Creating the Basin
Follow the same process to create the basin. Ensure the bottom is level and strong enough to hold water. Once you reach the desired height, allow the mortar to set for at least 24 hours before proceeding.
For the final touch, mix a 1:3 ratio of cement to sand to create a smooth concrete mixture. Smoothen the basin's interior using a trowel, ensuring all surfaces are smooth and even. Allow this final layer to cure for at least 72 hours before using the bird bath.
Your new brick bird bath is ready to welcome avian visitors! Place it in your garden, add water, and watch as nature appreciates your handiwork. Regularly clean the bird bath to keep it inviting and well-maintained, ensuring it becomes a cherished part of your outdoor space for years to come.





