How to Install Blackout Curtains to Existing Curtains
Blackout curtains, with their dense fabric and tight weave, are an excellent solution to block out unwanted light and enhance your room's privacy. However, attaching them to your existing curtains can seem daunting. This step-by-step guide walks you through the process, ensuring your blackout curtains complement your decor while serving their intended purpose.
Before you start, gather your materials: blackout curtains, existing curtain rod and hardware, scissors, measuring tape, and a screwdriver if you need to adjust your curtain rod. Let's dive into the process.
Measuring and Preparing Your Curtains
Accuracy is key when measuring for blackout curtains. They should cover your window from top to bottom and side to side.



1. Measure the width of your window, including the depth of your window frame if you want the blackout curtains to completely cover the window.
Measuring the Width
Using a measuring tape, determine the width you need. Most blackout curtains come in standard widths, but if you need a custom size, order your curtains with the correct width.



2. Measure the drop from the top of the curtain rod to the sill. Blackout curtains should extend past the window sill for optimal light blocking.
Measuring the Drop
Again, most blackout curtains come in standard lengths, but if you need a custom length, order your curtains with the correct drop.
Attaching the Blackout Curtains
Once your blackout curtains arrive, it's time to attach them to your existing curtains and rod.






1. Unhook your existing curtains from the rod. If you have eyehooks or curtain rings, untwist them and remove the curtains.
Removing Existing Curtains
This step allows you to reuse your rod and hardware, making the process more cost-effective.
2. Thread your blackout curtains onto the rod. Most blackout curtains have header tabs at the top that slide onto the rod. If yours don't, you may need to install curtain rings or eyehooks onto the blackout curtains.

Installing the Blackout Curtains
3. Once your blackout curtains are on the rod, hang them back up in the window. Ensure the curtains sit straight and cover the entire window.
4. Finally, reattach your original curtains to the blackout curtains. If your original curtains had rings or eyehooks, simply twist them back onto the rod. If your blackout curtains didn't come with header tabs, you may need to sew some onto the top of your original curtains.
Re-attaching Original Curtains
Now, when you open or close your curtains, your blackout curtains will seamlessly move with them, enhancing your room's ambiance while blocking out light.
Customizing Your Setup
If your window doesn't fit standard curtain sizes or you want a unique setup, you have several customization options.
1. Consider using a second curtain rod. Install a second rod above your existing one and hang your blackout curtains on it. This allows them to remain hidden behind your original curtains when closed, creating a seamless look.
Installing a Second Rod
If your window is wide enough, you can also place the second rod to the side of the first, allowing the blackout curtains to cover the entire window while still giving you access to your original curtains.
2. Use a track system. If your window is particularly wide or you have sliding glass doors, a track system might be the best solution. The tracks can accommodate both your original curtains and your blackout curtains.
Using a Track System
Tracks allow for easy opening and closing of both sets of curtains, preventing fabric bunching or damage.
There you have it! Attaching blackout curtains to your existing curtains can be a breeze with the right approach. Now, enjoy your newly tailored privacy and light control. Remember to care for your blackout curtains regularly to maintain their effectiveness and longevity. Happy customizing!





