DIY Pressure Washer Hose Reel: Easy Homemade Solutions
Tired of the tangled, time-consuming hassle of managing your pressure washer hose? It's time to make this chore a breeze with a DIY pressure washer hose reel. Not only will it save you time and effort, but it's also a great way to keep your hose accessible and organized. Let's dive into how you can create your own homemade pressure washer hose reel, optimize your cleaning routine, and even save some space in your garage.
Not only does a homemade pressure washer hose reel save you time and effort, but it also helps prolong the lifespan of your hose. By keeping it neatly stored and off the ground, you prevent kinks, twists, and premature wear. Additionally, having your hose neatly reeled away helps keep your workspace clean and safe, preventing trips and falls.
Understanding Your Pressure Washer Hose
Before we dive into creating your homemade pressure washer hose reel, it's essential to understand the type and length of your hose. Most residential pressure washers come with a 25-foot hose, while commercial ones can have hoses up to 100 feet. Your reel should accommodate the length of your hose comfortably, with no excess or slack.



Hoses can also vary in diameter, typically ranging from 3/8 inch to 1/2 inch. Ensure your reel can accommodate the diameter of your hose. Some reels may require adjustments or modifications to fit specific hose sizes.
Materials Needed
Before gathering your tools and materials, ensure you have everything on hand to make the project smoother and faster. Here's a list of materials you'll need:



- PVC pipe (2-inch diameter and 10 feet long)
- End caps (two 2-inch PVC end caps)
- Hose reel bracket (nylon or metal, suitable for your hose diameter)
- olis
- PVC cement glue
- Sandpaper
- Strapping tape or duct tape
- Drill (with a 1/2-inch drill bit)
- Hacksaw or PVC pipe cutter
- Utility knife
- Tape measure
Tools Required
While the materials list focuses on the essentials, you might need additional tools to make the process more manageable:
- Primer for PVC pipe
- Paint (optional, for decorative purposes)
- Paintbrushes (optional)
- Safety glasses
- Gloves (to protect your hands from debris and adhesive)
- Sawhorse or stable work surface
Creating Your Homemade Pressure Washer Hose Reel
Now that you've gathered your materials and tools, it's time to dive into the build process. Follow these steps to create a functional and durable hose reel:
- Measure and cut your PVC pipe: Use a hacksaw or PVC pipe cutter to cut the 10-foot piece of PVC pipe into two equal 5-foot lengths. These will serve as the cores of your hose reel.
- Prepare the PVC ends: Lightly sand the cut ends of the PVC pipe using medium-grit sandpaper. This step removes any burrs and ensures better adhesion for the PVC cement glue.
- Apply primer: Apply PVC primer to both the sanded ends of the PVC pipe and the inside of the PVC end caps. Allow the primer to sit for a few minutes to activate.
- Glue the end caps: Using PVC cement, glue one end cap onto one of the sanded PVC pipe ends. Ensure it's centered and seated properly. Hold it in place for a few seconds to let the glue set. Repeat this process with the second cap and the other pipe end.
- Create the reel brackets: Measure and cut the hose reel bracket into two equal halves. These will serve as the mounting points for your reel.
- Drill mounting holes: Using a 1/2-inch drill bit, drill four evenly spaced holes in each bracket. These holes will allow you to attach the reel to a wall or other surface.
- Assemble the reel: Align the two PVC pipe cores, with the end caps facing outwards. Use strapping tape or duct tape to secure the cores together temporarily, ensuring they're parallel and centered.
- Mount the reel brackets: Place a bracket on each end of the assembled reel. Drill small pilot holes through the bracket and into the end caps. Screw the brackets onto the reel using your chosen mounting screws.
- Decorum bevel (optional): If desired, paint your homemade pressure washer hose reel for a polished, finished look. Allow the paint to dry completely.
- Install the reel: Mount your homemade pressure washer hose reel on the wall using the pre-drilled holes. Ensure it's securely attached and at a convenient height for easy loading and unloading of your hose.
Winding and Storing Your Pressure Washer Hose
Now that your homemade pressure washer hose reel is complete, it's time to load your hose:






- Start by uncoiling your hose, ensuring there are no kinks or twists.
- Hold one end of the hose and begin wrapping it around the reel, keeping the wraps neat and even.
- As you wrap, ensure the hose is centered on the reel and not overheating the sides. This prevents strain on the hose and extends its lifespan.
- Once the entire hose is wound, secure it with a small piece of tape to keep it from unraveling when you remove it.
With your new homemade pressure washer hose reel, you'll not only save time and effort but also keep your workspace organized and safe. Plus, you've tackled a DIY project that enhances your cleaning routine and adds a touch of personal pride to your home maintenance tasks. So go ahead, get your DIY spirit pumping, and create a functional, convenient pressure washer hose reel that makes your cleaning chores a breeze!




