hanging old cabinets in garage

Revitalize Your Space: Install Hanging Old Cabinets in Garage

By John Wilson
AD

If you're looking to maximize your garage storage space, considering hanging old cabinets in your garage is a practical and budget-friendly solution. Repurposing old cabinets not only adds functionality to your garage but also provides an eco-friendly way to reduce waste. But how do you go about hanging these often heavy and bulky items? Let's dive into the steps and essential tips for a successful installation.

Before you embark on this project, ensure you've selected cabinets that fit your garage's dimensions and meet your storage needs. Standard kitchen cabinets typically work well in garages, but you might also consider deep, wide cabinets designed for commercial spaces. Always measure your garage walls and compare them to the cabinet dimensions to avoid disappointment.

Preparation and Planning

Before you can start hanging your cabinets, there's some preparation and planning to undertake. Accurate planning ensures you'll make the most out of your space and avoid costly mistakes.

AD
DIY: Hanging Garage Cabinets
DIY: Hanging Garage Cabinets
Repurposed Kitchen Cabinets DIY Project
Repurposed Kitchen Cabinets DIY Project
a wooden cabinet with tools hanging from it
a wooden cabinet with tools hanging from it

First, sketch a layout of your garage, including door, window, and wall plug locations. Use this sketch to experiment with cabinet placement without physical trial and error. Consider applying wallpaper or a vinyl backdrop to your layout for a more realistic representation.

Gathering Tools and Materials

A successful installation relies on having the right tools and materials. Fortunately, most of these items you likely already have. If not, you can easily purchase them from your local hardware store. The essentials include:

an organized garage with tools hanging on the wall and pegboard in front of it
an organized garage with tools hanging on the wall and pegboard in front of it
a man is holding two open cabinets with tools in them and there are other tools hanging on the wall
a man is holding two open cabinets with tools in them and there are other tools hanging on the wall
Installing Large Garage Cabinets
Installing Large Garage Cabinets
  • Tape measure
  • Level
  • Screwdrivers
  • Drill (cordless or corded, with drill bits and driver bits)
  • Wall anchors
  • Screws
  • Stud finder
  • Safety glasses

Locating Studs

Wall studs act as the primary anchor points for hanging heavy items like cabinets. To locate them, use your stud finder and mark their positions on the wall. Alternatively, you can knock on the wall; studs cause a solid thud sound, whereas cavities produce a hollow sound.

Once you've located the studs, measure and mark their positions at the desired cabinet height. The top of your cabinets should generally be around 80-84 inches from the floor, but adjust this based on your specific needs and ceiling height.

AD

Hanging the Cabinets

With everything prepared, it's time to hang your cabinets. Begin by dismantling any cabinets that don't have suspended bottoms or backs. This allows you to access the inner walls for pilot hole drilling and screw insertion.

Hang Cabinets Without Studs (Stronger Than You Think)
Hang Cabinets Without Studs (Stronger Than You Think)
an empty room with two green doors and a potted plant on the floor next to it
an empty room with two green doors and a potted plant on the floor next to it
This American House
This American House
🗄️ Wall-Mounted Cabinets – Smart Wall Storage Ideas for Garage
🗄️ Wall-Mounted Cabinets – Smart Wall Storage Ideas for Garage
two pictures with the words, my recycled workshop cabinet edition on them and an image of kitchen cabinets
two pictures with the words, my recycled workshop cabinet edition on them and an image of kitchen cabinets
DIY Garage Cabinets - The Navage Patch
DIY Garage Cabinets - The Navage Patch

Start with the first cabinet, placing it on its back (if dismantled).のは jimmy and align it with your marked stud locations. Use a level to ensure vertical alignment and a tape measure to maintain consistent spacing between cabinets.

Drilling Pilot Holes

Before driving screws into the walls, drill pilot holes into the cabinet's back and side walls. This step prevents the wood from splitting and helps ensure accurate screw placement. Use a drill bit that's slightly smaller than your screw's diameter. For example, if you're using #8 x 2" screws, use a 3/16" drill bit.

AD

Pilot holes should be approximately 12 to 16 inches apart, with the first hole no more than 3 inches from the top edge. If your walls have wallboard Rather than studs at the desired cabinet height, use wall anchors to provide adequate support. Anchor options include toggle bolts, molly bolts, and expanding anchors.

Upgraded garage cabinet
Upgraded garage cabinet

Securing the Cabinets to the Wall

With pilot holes drilled, align the cabinet with the wall and mark the pilot hole positions on the wall using a pencil. Drill corresponding pilot holes into the wall using a drill bit slightly smaller than your screw's diameter. This step ensures easier screw insertion and helps prevent wall damage.

Now, insert your screws (with washers for added support) into the pilot holes on the cabinet. Hold the cabinet in place, and secure it to the wall by driving screws into the pilot holes until they're flush with the cabinet's back wall. Retest the cabinet's level and adjust as necessary.

AD

Reassembling and Attaching Remaining Cabinets

With the first cabinet secured, proceed to the remaining cabinets. Reassemble any dismantled components, ensuring they're properly aligned and leveled. Attach the cabinets together using screws driven through the side walls. Repeat the process of drilling pilot holes and securing the cabinets to the wall.

Once complete, step back and admire your new garage storage system. Not only have you added valuable storage space, but you've also given new life to old cabinets that might otherwise have gone to waste.

Regardless of the project, always prioritize safety. Wear safety glasses when using power tools, and consider using a workbench or sawhorses to support your cabinets during dismantling and reassembly. With a little elbow grease and careful planning, you can transform your garage into a neatly organized space that's the envy of your neighbors – all by simply hanging old cabinets. So, go ahead and get started!

AD