FRAM PH3387A Oil Filter: Premium Engine Protection & Reliable Performance
FRAM PH3387A is a spin-on oil filter that has become a familiar part number for owners of older General Motors cars, trucks, and SUVs. It is part of the FRAM Extra Guard family, a line built for everyday oil changes rather than track-day extremes, and it shows up in parts stores and online catalogs under the same short alphanumeric code.
If your owner's manual, oil cap, or favorite parts lookup calls for a PH3387A, the real questions are usually practical: what does it fit, what are its specs, which filters interchange with it, and how should it be installed? The answers matter because a filter that threads on but has the wrong bypass valve, gasket size, or internal capacity can quietly compromise engine protection.
FRAM PH3387A Specs and Cross-Reference Basics
Understanding the FRAM PH3387A starts with its physical design. It is a canister-style oil filter that screws onto the engine block or a remote filter adapter, and it relies on a rubber gasket to create a leak-free seal under oil pressure. The part number is not universal, so even a small difference in thread pitch or gasket diameter can prevent a proper fit.
From a maintenance standpoint, the PH3387A is designed to trap contaminants while allowing oil to flow at the rate the engine needs. Its internal bypass and anti-drainback features matter as much as the external dimensions, especially on older engines that may sit for days between starts or operate in cold weather.
Core Specifications of the PH3387A
FRAM PH3387A is commonly listed as a spin-on filter with a 13/16-16 threaded inlet, an overall height around 3.78 inches, and an outside diameter near 2.98 inches. The gasket is sized to seal against a matching engine block or filter adapter face, and the canister has a fluted body that most standard oil filter wrenches can grip.
Inside, the PH3387A uses filtration media designed to capture dirt, metal particles, and sludge that accumulate in motor oil. It also has an anti-drainback valve to keep oil from draining back into the pan during shutdown, which helps reduce dry starts, and a bypass valve that opens if the media becomes clogged or the oil is too thick to flow.
Cross-Reference Numbers and Interchange Caution
Depending on the application, the FRAM PH3387A is often cross-referenced with AC Delco PF47, PF52, and PF53, as well as Wix 51040, Purolator L10193, NAPA 1040, and Mobil 1 M1-101. These numbers share a similar thread and gasket family, but they are not always identical in length, bypass pressure, or anti-drainback design.
Interchange charts are a starting point, not a guarantee. A longer filter may fit physically but can sit too close to exhaust or steering components, while a shorter filter may reduce oil capacity. The safest approach is to compare thread size, gasket dimensions, bypass valve setting, and the manufacturer's fitment guide for your specific engine.
Fitment, Installation, and Maintenance for FRAM PH3387A
Fitment is where most oil filter mistakes happen. The FRAM PH3387A may be listed for a wide range of vehicles, but the same engine family can use different filter lengths or bypass settings depending on the model year, oil pan, and accessory drive. A confident fitment check takes only a few minutes and can prevent leaks or low oil pressure.
Once the correct filter is confirmed, installation and maintenance are straightforward. The PH3387A is not a complicated part, but it rewards careful habits: clean mounting surfaces, a lubricated gasket, proper tightening, and regular oil change intervals that match the oil and driving conditions.
Vehicle Compatibility and Fitment Checks
The FRAM PH3387A is most commonly associated with older GM four-cylinder and V6 engines, including many 2.2L, 2.5L, 3.1L, 3.4L, and 3.8L applications found in Buick, Chevrolet, Oldsmobile, Pontiac, and some Cadillac models. It can also appear on certain marine and industrial engines that use the same GM-style filter mount.
To verify fitment, start with the owner's manual or the filter specification sticker under the hood. Then check the thread pitch, gasket diameter, and clearance around the filter housing. If you are using a cross-reference number, look up the dimensions of the original filter rather than relying only on the vehicle year, make, and model.
Installation Tips and Oil Change Intervals
Before installing a new FRAM PH3387A, clean the mounting surface and remove the old gasket. Put a thin coat of clean engine oil on the new filter's gasket, then spin the filter on by hand until the gasket contacts the base. Turn it an additional three-quarters of a turn after contact, or follow the instructions printed on the filter. Do not use an oil filter wrench to tighten it, because over-tightening can distort the gasket and make the next removal difficult.
After filling the engine with the correct oil, run it for a minute and check for leaks around the filter. FRAM positions the Extra Guard line as a 5,000-mile filter, but the owner's manual or oil life monitor should guide the actual interval. If you use synthetic oil and a longer interval, consider whether the filter is rated for that distance, and always dispose of used oil and filters at a recycling center.
If you keep a FRAM PH3387A on the shelf, treat it as one part of a complete maintenance routine rather than a magic bullet. Confirm the part number, inspect the gasket, use the right oil, and check for leaks after every change. That habit will do more for an older GM engine than any single filter number ever could.