fox 40 suspension guide

Fox 40 Suspension: Comprehensive Setup & Maintenance Guide

By Nicole Taylor
AD

Fox 40 suspension systems, renowned for their durability and performance, have garnered a significant following among mountain bikers and off-road enthusiasts. While they're robust and reliable, proper maintenance and understanding of their workings are crucial for optimal performance. This guide delves into Fox 40 suspension parameters, adjustments, and common troubleshooting tips to help you make the most of your suspension.

The Fox 40 is a popular choice among downhill and free-ride bikers due to its high adjustability and robust design. It's essential to know your way around its intricacies to fine-tune your ride experience. Let's dive into the details and ensure your suspension is serving you at its peak performance.

Fox 40 Suspension Basics

The Fox 40 is a double crown fork with 36mm stanchions, available in 26", 27.5", and 29" sizes. It features a number of adjustment options including compression, rebound, and air spring pressure, allowing riders to tailor the suspension to their weight, riding style, and terrain.

AD
an image of the parts of a fox float shock
an image of the parts of a fox float shock
the different types of mountain bike suspensions
the different types of mountain bike suspensions
an image of some type of machine with instructions
an image of some type of machine with instructions

The Fox 40 is renowned for its exceptional stiffness and tracking accuracy, thanks to its twin-tube design and a 15mm through-axle. Understanding these features and how to adjust them can significantly enhance your riding experience.

Air Spring Setup

The Fox 40 uses a Nitrokeed technology air spring, offering a wide range of adjustability. By changing the air pressure in the spring, you can adjust the fork's 'sag', or the amount of travel used under your rider's weight. Maintaining the correct sag ensures the fork's travel is fully utilized and works optimally with your shock.

an illustrated diagram of the suspensions and parts of a bicycle
an illustrated diagram of the suspensions and parts of a bicycle
a diagram showing the parts of a floatr that is attached to a boat's hull
a diagram showing the parts of a floatr that is attached to a boat's hull
Ultimate Guide: Fox MTB Suspension Lineup
Ultimate Guide: Fox MTB Suspension Lineup

Fox recommends a 25-30% sag for their forks. To achieve this:

  1. Fully extend the fork.
  2. Stand on the bike and slowly sit down, allowing the fork to compress.
  3. Measure the compressed length and compare it with the fully extended length. The ideal sag is 25-30% of the total travel.

Compression and Rebound Adjustments

The Fox 40's compression and rebound adjustments allow you to fine-tune the fork's behavior during different phases of travel. Compression damping affects how the fork responds to impacts, while rebound determines how quickly it returns to its original position.

AD

Compression and rebound adjusters, located on each leg of the fork, are typically marked from 'open' (least resistant) to 'locked' (most resistant). Start with both settings in the middle of their range, then adjust based on your riding style and terrain. After each adjustment, take a few test rides to feel the changes and make further adjustments as needed.

an image of some type of device with instructions on how to use it
an image of some type of device with instructions on how to use it
First Ride: Air-Sprung Fox 40 Float RC2 Fork – The Truth is Revealed - Pinkbike
First Ride: Air-Sprung Fox 40 Float RC2 Fork – The Truth is Revealed - Pinkbike
an image of the front and back of a bike with instructions on how to use it
an image of the front and back of a bike with instructions on how to use it
an image of different types of motor parts
an image of different types of motor parts
Review: Fox Live Valve Suspension by RichardCunningham - Pinkbike
Review: Fox Live Valve Suspension by RichardCunningham - Pinkbike
Fox Float 40 RC2 fork 2013 at RC photo in San Diego, California, United States - photo by RichardCunningham - Pinkbike
Fox Float 40 RC2 fork 2013 at RC photo in San Diego, California, United States - photo by RichardCunningham - Pinkbike

Maintenance and Troubleshooting

Regular maintenance is vital for keeping your Fox 40 in top shape. This includes routine cleaning, lubrication, and inspection of seals and bushings. Fox recommends servicing the fork annually or every 50-100 hours of ride time, depending on use.

Common issues include excessive squeaking, poor performance, or oil leaks. Most squeaks can be addressed with additional lubrication or more adequate pressure settings. Poor performance may suggest a need for a service or rebuild. Leaks, on the other hand, typically indicate a crack in the outer stanchion or they may be oil from the lubricated seals.

AD

Fox 40 Service Options

Fox offers various service options, from simple oil changes to complete overhauls. Their 'Ultimate Service' includes a complete disassembly, cleaning, inspection, replacement of worn parts, and reassembly with new fluid and seals.

fox suspension
fox suspension

Regular services ensure your Fox 40 maintains its performance, enhances longevity, and retains its value. It's also a great opportunity to upgrade or replace worn parts with higher-performance alternatives.

Don't forget, a well-maintained suspension is not only a financial investment but also a safety one. A smooth, reliable Fox 40 will give you the confidence to tackle any terrain, secure in the knowledge that your suspension is doing its job to perfection.

AD
AD