Flatbed Lights Wiring: Expert Guide & DIY Tips
Flatbed lights, also known as work lights or scene lights, are essential for various industries and activities that require reliable, portable illumination. Wiring these lights correctly ensures their optimal performance and longevity. Let's delve into the intricacies of flatbed lights wiring, guiding you through the process with clear, actionable steps.
Before we start, ensure you have the necessary tools and understanding of electrical safety. Always turn off power sources, use insulated gloves, and follow local electrical codes. Now, let's dive into the world of flatbed lights wiring.
Understanding Flatbed Lights Wiring Basics
The foundation of flatbed lights wiring involves understanding the components and the basic circuit it forms. Typically, a flatbed light setup consists of the light, power source (usually a battery or generator), and wiring that connects them. The circuit comprises positive and negative wires, with the light acting as the load.



Key components to recognize include the power source, the light itself, the gauge of wires used, and any connected switches, fuses, or relays. Knowledge of these elements will help you conceptualize and execute the wiring process.
Choosing the Right Wire Gauge
Wire gauge, often referred to as AWG (American Wire Gauge), represents the diameter of the wire. Choosing the right gauge ensures your flatbed lights receive optimal power, preventing excessive heat and potential damage.



A common misconception is that bigger wires are always better. While thicker wires offer lower resistance, excessive gauge may not be necessary or practical. A general guideline for 12V automotive lighting is:
- 6-12A: 18AWG
- 12-25A: 16AWG
- 25-40A: 14AWG
- Over 40A: 12AWG
Wiring for Parallel or Series
Flatbed lights can be wired in series or parallel, depending on your requirements. Each method has its advantages:
- Series: Connects lights one after another, with the same current flowing through each. Useful for limited power sources, but any voltage drop in the circuit might leave lights dim or offline.
- Parallel: Connects lights across the power source, sharing current but not voltage. Ideal for varying loads or long wire runs, but requires more complex wiring.
Step-by-Step Flatbed Lights Wiring Guide
With the basics understood, let's proceed with a step-by-step guide for wiring your flatbed lights. For demonstration purposes, we'll use a parallel connection for 12V, 10A lights.





**Materials:** 14AWG wire, connectors, fuse, inline fuse holder, switch, 12V power source, and your flatbed lights.
Preparation and Safety
Disconnect the power source, wearing insulated gloves to ensure electrical protection. Ground both yourself and your tools to dissipate static, preventing electrical shorts.
Measure and cut your wires according to your setup. Remember, longer wires mean more resistance, so keep them as short as practical. Stagger your wire cuts, crimping connectors one end at a time.
Wire the Power Source
Connect the firewall (power source) wire to the battery. Ensure positive (+) and negative (-) terminals are correctly identified. Use a fuse for the positive terminal to protect your circuit from overheating.
Install an inline fuse holder closer to the battery, leaving enough wire length for the switch and lights. Cut your wires to meet the fuse and switch locations, connecting them as follows:
- Positive (+) battery to positive (+) fuse terminal.
- Negative (-) battery to negative (-) bypassing the fuse.
Wire the Switch
Connect the switch inline with the positive (+) power supply. This allows you to manually turn on/off your lights. Use a single pole, single throw (SPST) switch for this purpose.
Connect the switch as follows:
- One terminal to the positive (+) output of the fuse.
- The other terminal to the positive (+) power input of the lights.
Wire your Flatbed Lights
Connect your lights in parallel, ensuring negative (-) terminals are interconnected and positive (+) terminals are connected to the switch.
Test your setup by connecting your battery, flipping the switch, and observing if all lights illuminate correctly. If successful, your flatbed lights are now correctly wired and ready for use!
Congratulations on successfully wiring your flatbed lights! Regularly inspect your setup, checking wire connections and ensuring no excessive heat or corrosion has occurred. Happy lighting!





