Field Artillery Hats: The Ultimate Collector's Guide to Military Headgear
Few pieces of military headgear carry as much personality as a field artillery hat. Whether it is the towering black Stetson worn by a division artillery soldier during a ceremony or the plain olive service cap with a scarlet cord that a World War II gunner wore in a muddy battery position, these hats announce exactly who the wearer is and what they do for a living. The field artillery is the "King of Battle," and its soldiers have never been shy about advertising that fact on their heads.
What makes field artillery hats so interesting is that they exist in two worlds at once. In combat, they are practical gear, designed to keep rain, sun, and shrapnel off a soldier's skull while he works a howitzer. In garrison and on parade, they become symbols loaded with tradition, color, and rank. Understanding them means looking at both the utilitarian and the ceremonial sides of the branch.
The Roots of Artillery Headgear in the U.S. Army
For most of the nineteenth century, the United States Army used clothing as its primary system of identification. There were no shoulder patches, no unit crests pinned to a lapel, and no name tapes. Soldiers, officers, and even casual observers read a man's branch from the color of his trim, his buttons, and his hat. Artillerymen were marked by one color above all others: scarlet.
That scarlet trim ran through the entire uniform, from trouser stripes to the cords on a cap. Headgear became the most visible canvas for that color, which is why artillery hats from the 1800s look so deliberately, almost theatrically decorated compared to the subdued gear of later decades. A hat in that era was a billboard for branch pride.
From Shako to Hardee Hat
The Army's early artillery headgear followed European fashion more than American practicality. Leather and felt shakos, tall and stiff, were standard issue in the 1820s and 1830s, and it was during this period that the crossed cannons motif became firmly attached to artillery caps. The insignia of crossed field guns remains, by most accounts, the oldest branch insignia still in continuous use in the U.S. Army.
By the late 1850s the Army had introduced the 1858 dress hat, commonly called the Hardee hat, which was prescribed for mounted troops and light artillery. It was a broad-brimmed black felt hat with a brass eagle on the side and, for artillery wearers, a black plume and a red cord. Photographs of light artillery batteries from the antebellum period show the hat worn with a rakish tilt that was probably regulation and probably ignored in equal measure.
The Red Hat Cord and the "Redleg" Nickname
The nickname "Redleg" traces back to the scarlet stripes that artillery soldiers wore down the outside seam of their trousers. The name stuck long after the stripes disappeared from everyday uniforms, and the red hat cord became a kind of ceremonial descendant of that old visual marker. An artilleryman in a service cap with a red cord is still, in the traditional vocabulary of the Army, a Redleg.
That cord survives in modern dress uniforms. Officers and enlisted soldiers in the field artillery branch wear scarlet cord or piping on their service caps and garrison caps, while other branches wear their own designated colors. The difference between a red cord and a yellow cord on an otherwise identical cap is the difference between an artillery battery and a cavalry troop, and veterans can read that distinction across a parade field at a glance.
Field Artillery Hats of the Modern Era
The twentieth century split artillery headgear into two distinct families: the mass-produced utility hats that millions of soldiers wore, and the highly specialized ceremonial hats that relatively few ever get to put on. The two categories rarely overlap, and each has its own collectors, vendors, and traditions.
Wartime production also introduced a level of standardization that earlier hats never had. Contract labels, specification numbers, and standardized materials mean that a mid-century artillery cap can often be dated to within a year or two, which is a gift to anyone who studies or collects them.
The Wartime Service Cap and Garrison Cap
During the Second World War, the most common dress headgear for artillery soldiers was the olive drab service cap, a peaked wool hat with a scarlet cord and the crossed cannons insignia on the front. It was stiff, hot in the summer, and utterly traditional, which is precisely why it stayed in the supply system for so long.
The garrison cap, also called the overseas cap, was the practical alternative. It folded flat, packed into a duffel bag, and could be worn with a scarlet piping that identified the branch. Enlisted soldiers and officers wore slightly different versions, and variations in cut, lining, and piping width let a knowledgeable collector distinguish a 1942 contract cap from a Korean War replacement.
The Artillery Stetson
The most recognizable modern field artillery hat is the black Stetson, a wide-brimmed felt hat with a high crown that is worn by certain artillery formations with cavalry lineage. The 1st Cavalry Division Artillery is the best-known example. The hat is shaped, blocked, and creased according to unit custom, and the cords across the brim carry specific colors and patterns that indicate squadron or battalion affiliation.
These hats are not issued in the same way as a patrol cap. Soldiers typically buy or are presented with a Stetson, and it is expected to be maintained carefully, shaped correctly, and worn only within appropriate parameters set by the unit commander. Buying a good one involves real money, sometimes several hundred dollars, and a proper fitting, which is why they are treated as personal property rather than disposable gear.
Combat Headgear: Steel Pots, Kevlar, and Boonie Hats
On the gun line, nobody wears felt. Artillery soldiers have historically gone to war in the same steel and composite helmets as everyone else, usually with branch insignia on the liner or a stenciled marking on the shell rather than a decorative cord. The M1 helmet of the mid-century era, the PASGT, and the later ACH and ECH families all saw service with artillery units.
In the field, the boonie hat and the patrol cap do most of the real work. Both are light, allow the wearer to hear radio traffic and shouted fire commands without muffling, and offer sun protection for long hours on a firing point. The branch identity here is subtler, usually a scarlet thread, an embroidered crossed cannons patch, or a unit insignia on the front of the cap.
Buying and Collecting Field Artillery Hats
The market for artillery headgear spans three very different groups: reenactors who want period-correct reproduction, veterans who want to replace a hat they lost or wore out, and collectors who are chasing original pieces. Each group has different priorities, and the same hat can be a bargain to one buyer and a waste of money to another.
Prices vary enormously. A surplus garrison cap with scarlet piping might sell for the cost of a sandwich. A documented pre-war service cap with original insignia and a matching contract label can command hundreds. A custom-shaped Stetson with unit-authentic cords sits somewhere in between and depends heavily on the reputation of the maker.
Identifying Reproductions and Genuine Period Pieces
Original caps show their age in predictable places. The sweatband is usually the first component to fail, and original leather or leatherette bands crack, dry out, and separate from the crown. Wartime-era labels were often printed with contract numbers and maker names, and those labels frequently survive even when the lining does not.
Insignia attachment is another telling detail. Screw-back posts and clutch-back pins were used in different periods, and the metal itself oxidizes differently depending on composition. A pristine 1943-dated cap with a bright, freshly plated insignia is worth a second look, because wartime metalwork rarely stayed that shiny for eighty years.
Care, Fit, and Display
Felt hats need air. Storing a Stetson in a plastic bag traps moisture and invites mildew, so a breathable hat box or a shelf with reasonable airflow is a better choice. Brushing the felt with a soft horsehair brush against the nap lifts dust without distorting the fibers, and a light steaming can restore a crushed crown if it is done carefully.
Leather sweatbands benefit from occasional conditioning, but sparingly. Over-oiling a band can stain the felt from the inside out, which is a difficult mistake to reverse. For display, keep hats out of direct sunlight, since ultraviolet light fades both felt dye and cord colors, and rotate pieces so that no single hat bears the entire burden of a permanent shelf position.
Whether you are hunting for an original wartime cap, shaping your first Stetson, or simply trying to figure out why the artillery wears red, these hats reward a closer look. The details that separate a good one from a great one are usually hidden in the lining, the cord, and the crease, and that is exactly where the tradition lives.