Facedown Skateboard: The Ultimate Guide to Decks, Tricks, and Riding Style
Somewhere on a quiet residential hill, a rider lies chest-down on a skateboard and drops into the slope headfirst, arms tucked, wheels humming louder with every second. That image is what most people are searching for when they type "facedown skateboard" into a browser. It is not a brand, and it is not a specific board sold in shops. It is a riding discipline, a cousin of downhill skateboarding and street luge, and it asks a very simple question: what happens when you take the standing part out of skateboarding and put your whole body on the deck?
The answer is speed, a low center of gravity, and a learning curve that rewards patience. Facedown riding turns an ordinary cruiser into something closer to a luge sled, and it forces you to rethink balance, braking, and even how you push off. Whether you are a downhill skater looking for a new challenge or a curious beginner who saw a clip online, understanding the mechanics behind the position will save you a lot of road rash.
What Facedown Skateboarding Actually Is
In its purest form, facedown skateboarding means lying prone on a skateboard with your chest and stomach on the deck, your head up and looking forward, and your feet trailing behind you. Your body points down the hill feet-first, just like a street luge racer, and your hands become your steering and braking tools. Because your mass sits only a few inches off the pavement, the board feels dramatically more stable than it does under your feet, especially at speed.
The position is not new. Old-school "coffin" riding, where a skater lies flat on a deck and rolls down a driveway, has been a party trick for decades. Facedown riding takes that same idea and applies it to real hills, real speed, and real equipment choices. It sits in the gap between casual skateboarding and competitive luge, which is exactly why it appeals to riders who want the thrill without buying a purpose-built sled.
The Prone Position and How It Works
When you ride facedown, your weight is spread along the entire length of the deck rather than concentrated over two trucks. That distribution lowers your center of gravity to roughly the height of the wheels, which is why the board tracks straight and resists the wobbles that plague standing riders at speed. Your arms act as outriggers: extended forward, they shift weight between the nose and tail, and pulled tight to your sides, they reduce drag and let you tuck into a smaller profile.
Steering happens through the shoulders and hips more than the feet. Leaning your upper body toward one rail compresses the bushings on that side and the board carves; pressing your trailing feet down shifts grip to the rear and can break the back wheels loose for a controlled slide. Many riders also grip the deck's rails with their fingers, using small pulls to fine-tune the line through a corner. It sounds subtle, and it is, but after an hour on a gentle slope the inputs start to feel as natural as leaning on a bicycle.
Facedown Skateboarding vs. Street Luge and Buttboarding
Street luge uses a purpose-built sled with a rigid frame, padded rails, and a wheelbase measured in feet rather than inches. Riders lie face-up, feet-first, with their heads at the rear, and speeds regularly climb past what any skateboard can survive. Buttboarding is the seated cousin: you sit on the deck, plant your hands behind you, and slide downhill with your feet forward. Facedown riding borrows from both but keeps the skateboard intact.
That difference matters practically. A facedown rider can stand up at any moment, walk back up the hill, and use the same board for cruising, commuting, or park laps. There is no trailer, no frame, and no specialized venue required. The trade-off is that a skateboard deck was never engineered for a chest-height load, so setup choices and maintenance become more important than they would be for a standing rider.
Gear and Setup That Makes Facedown Riding Work
Your board has to carry a body, not a pair of feet, and that changes everything about how you build it. A flexible deck that feels playful underfoot will sag and chatter under your sternum, and narrow trucks that carve nicely while standing can feel twitchy when your weight is spread across the whole platform. The goal is stiffness, stability, and predictable feedback.
Wheels, bushings, and bearings matter just as much as the deck. Facedown riders generally want wheels that grip and roll smoothly rather than slide easily, bushings that resist compression without feeling dead, and bearings that stay quiet under sustained speed. Getting these four elements right is the difference between a board that feels planted and one that feels like it is trying to throw you off.
Choosing the Right Skateboard and Hardware
A wide deck in the 8.5 to 10 inch range gives your chest something to rest on and keeps your hands far enough apart to steer effectively. Seven to nine plies of hard maple, or a stiff composite construction, holds its shape when you press your full weight into the middle. A longer wheelbase, roughly 15 to 17 inches, adds straight-line stability and reduces the nose-lift effect that happens when your chest sits too far forward.
Trucks around 180 millimeters and up handle the extra load without bending, and harder bushings prevent the deck from collapsing into the wheels during hard leans. Wheels in the 65 to 75 millimeter range with a durometer around 78a to 83a offer grip and roll speed without excessive bounce. Before every session, check axle nuts, pivot cups, and the bolts holding your trucks, because the forces involved in prone riding work hardware loose faster than a typical street session would.
Protective Gear and Safe Progression
A full-face helmet is not optional. When your head is the leading point of your body and a fall pushes you face-first into asphalt, a standard half-shell will not protect your jaw or teeth. Add a leather or heavy textile jacket, slide gloves with plastic pucks, knee and elbow pads, and a chest protector if you are riding anything steep. Keep your clothing fitted so it does not snag on the wheels or catch the wind.
Progression should be aggressively boring at the start. Learn the position on flat ground, then a driveway, then a slope you could easily run out of. Practice falling by rolling onto your shoulder rather than reaching out with a straight arm. Ride with someone who can spot traffic, and walk any hill before you ride it, checking for potholes, gravel, drainage grates, and blind driveways that will end your run badly at speed.
Technique, Spots, and Community
The hardest part of facedown skating is not balancing on the board, because the board practically balances itself. The hard part is propulsion and control, since you cannot simply step off and walk when things go wrong. Everything from starting to stopping has to be learned deliberately, and rushing that process is how most beginners get hurt.
Spot selection is equally important. Smooth, clean asphalt with a gentle grade and a long runoff is ideal. Rough chip-seal surfaces will vibrate through your chest, and short hills with a hard stop at the bottom leave no margin for error. Reading terrain becomes a skill in itself, and experienced riders can judge a road's safety within seconds of seeing it.
Mastering the Push, Steering, and Stopping
Getting moving from a prone position usually means a running start. You jog alongside the board, drop your chest onto the deck, and grab the rails as your momentum carries you forward. On flat ground, riders use a paddling motion with alternating hands on the pavement, similar to how a swimmer pulls water, though this is exhausting and rarely worth it on anything longer than a driveway.
Stopping is a layered skill. Foot braking, where you drag the sole of a shoe beside the board, works at low speed but destroys shoes quickly. Glove slides, where you plant a puck and let it drag, handle moderate speeds. Turning across the fall line to scrub speed is the most controlled option on a wide road. Bailing should be the last resort, and when it happens, roll with the momentum instead of fighting it.
Finding Hills, Crews, and Events
Closed roads are the gold standard. Downhill skateboarding events frequently run on cordoned-off mountain passes, and many of them include luge and prone categories alongside the standing classes. Parking garages offer consistent, smooth surfaces after hours, though security will usually move you along, and skateparks are useful for flat-ground practice and learning the position safely.
The community is small but welcoming. Local downhill crews often have at least one rider who has tried prone skating, and online forums and social groups dedicated to luge and downhill skateboarding are good places to ask about setups and nearby spots. Showing up to an event as a spectator, talking to riders, and borrowing a setup for a gentle run is the fastest way to learn what actually works.
Facedown skateboarding is one of those disciplines that feels absurd for the first thirty seconds and completely logical after that. Your chest hits the deck, the wobble disappears, and the hill suddenly becomes a different kind of playground. Grab a stiff deck, a full-face helmet, and a slope you can walk away from, then find the riders in your area who already know the good roads. The first clean run will tell you whether this is a curiosity or your next obsession.