extension cord with two male ends

Extension Cord with Two Male Ends: The Ultimate Safety & Usage Guide

By Thomas Robinson
AD

An extension cord with two male ends looks simple enough at a glance, but it is one of the most dangerous electrical accessories a person can encounter. Instead of the familiar male-to-female design found on normal extension cords, this cord has prongs on both ends. That means when one end is plugged into a live outlet, the exposed prongs on the other end become energized and ready to deliver a lethal shock.

These cords are often called double male extension cords, male-to-male cords, or suicide cords, and they are not a standard household product. People usually search for them when trying to backfeed a house with a generator, connect an inverter, or solve an unusual power problem. In almost every case, the correct answer is not to buy or build one, but to use a safer, code-compliant alternative.

What Is an Extension Cord With Two Male Ends?

A male plug is the end with metal prongs that insert into an outlet or receptacle. A female connector is the end with slots that receive those prongs. A standard extension cord has one male plug and one female connector, allowing you to extend the reach of an outlet to a device. An extension cord with two male ends has a male plug on both ends, so there is no safe female receptacle for powering a normal appliance.

AD
Lowe's Essentials 4-ft 16 / 26 Light Duty 2 Prong Black Indoor Extension Power Cord one_size | 30000632
Lowe's Essentials 4-ft 16 / 26 Light Duty 2 Prong Black Indoor Extension Power Cord one_size | 30000632
3 ft. 14/3 Medium/Heavy Duty Indoor Extension Cord Flat Plug Flat Wire, 15Amps, Black
3 ft. 14/3 Medium/Heavy Duty Indoor Extension Cord Flat Plug Flat Wire, 15Amps, Black
50' Outdoor Extension Cord Black - Dealworthy™
50' Outdoor Extension Cord Black - Dealworthy™

Because both ends are male, the cord is designed to connect two female power sources or receptacles together. That might sound useful in theory, but in practice it creates a direct path for electricity to flow where it should not. It also leaves live prongs exposed whenever one end is plugged in, which is why electricians and safety organizations strongly warn against using one.

Common Names and Misconceptions

You may see this item called a double male extension cord, a male-to-male extension cord, a backfeed cord, a cheater cord, or a suicide cord. The term suicide cord is blunt, but it accurately reflects the extreme shock hazard. Some people also mistake it for a generator cord, but a proper generator cord has a male plug for the generator and a female connector for a transfer switch or inlet box.

Uxcell 2ft 18 AWG Black 18/3 Universal Power Cord C13 to Nema 5-15p 10A 125v 3-Prong Extension Power Cord
Uxcell 2ft 18 AWG Black 18/3 Universal Power Cord C13 to Nema 5-15p 10A 125v 3-Prong Extension Power Cord
Universal 2-Prong Polarized Male to IEC C17 Female Extension Cord 1.5m Power Replacement Cable for
Universal 2-Prong Polarized Male to IEC C17 Female Extension Cord 1.5m Power Replacement Cable for
Straight Nema 1-15p To 1-15r Cord, 1ft Polarized
Straight Nema 1-15p To 1-15r Cord, 1ft Polarized

Another common misconception is that a two male end cord is just a reversed extension cord. It is not. Reversing a normal cord does not change the fundamental male-to-female safety design. A male-to-male cord eliminates the protected female end entirely, so there is no safe way to handle it while any part of the circuit is energized.

Why People Search for This Cord

The most common reason people look for a double male extension cord is to connect a portable generator to a household outlet during a power outage. The idea is to feed electricity backward through the home’s wiring so selected outlets work. This practice is called backfeeding, and it is extremely hazardous because it can energize wires that utility workers believe are dead.

AD

Others search for a male-to-male cord to connect an inverter, tie two power sources together, or perform informal electrical tests. In nearly all of these situations, the user is trying to bypass a proper transfer switch, inlet box, or listed adapter. The temporary convenience is not worth the risk of electrocution, fire, or legal liability.

Maximm Cable 1-Outlet Angled Plug Flat Extension Cord, White / 15 FT
Maximm Cable 1-Outlet Angled Plug Flat Extension Cord, White / 15 FT
72 in. Interconnection Cable
72 in. Interconnection Cable
VOLTEC 03-00047 16/2-9'SJOW REPLACEMENT CORD
VOLTEC 03-00047 16/2-9'SJOW REPLACEMENT CORD
6ft Australian 3-pin Plug to C13 Power Cord
6ft Australian 3-pin Plug to C13 Power Cord
Power Cable
Power Cable
Chauvet Pro IPFLEXEXT50FT
Chauvet Pro IPFLEXEXT50FT

Critical Safety Risks of a Double Male Extension Cord

The primary danger of an extension cord with two male ends is exposed live metal. When one end is plugged into an energized outlet, the prongs on the other end carry the same voltage. If you touch those prongs, or if they contact a metal object, you can receive a severe shock, arc flash, or fatal electrocution.

Backfeeding is the second major hazard. Sending generator power into a home’s electrical panel without a proper disconnect can energize circuits beyond their intended capacity. It can also send power back onto utility lines, endangering lineworkers who may be repairing downed wires nearby. This is why many local codes and utility rules prohibit backfeeding without approved equipment.

AD

Electrocution, Arc Flash, and Fire Hazards

A male-to-male cord offers no protection against accidental contact. Even a brief touch can cause muscle contractions that prevent you from letting go. If the cord is damaged, wet, or undersized, the risk increases dramatically. Arc flashes can occur when live prongs contact metal, producing intense heat, light, and molten metal particles.

KHKFY Extension Cord 10 FT 2 Prong Power Cord Cable Small Short 18 AWG Power Cable US Male Female Black Extension Cord for Indoor Home Office
KHKFY Extension Cord 10 FT 2 Prong Power Cord Cable Small Short 18 AWG Power Cable US Male Female Black Extension Cord for Indoor Home Office
Uxcell 10Ft 15A 14awg 3 Prong Extension Cord, Sjt, ETL Listed, Black
Uxcell 10Ft 15A 14awg 3 Prong Extension Cord, Sjt, ETL Listed, Black

Fire is another serious concern. A cord that is not rated for the load can overheat and ignite nearby materials. Because the cord may be carrying current in an unintended direction, circuit breakers may not trip as expected. The result can be melted insulation, damaged outlets, and a house fire that starts behind a wall or inside an appliance.

Legal and Code Violations

The National Electrical Code and most local electrical codes require safe, approved methods for connecting alternate power sources. A homemade or unlisted male-to-male cord does not meet those requirements. Using one for generator backfeeding can violate utility regulations and may be illegal in your area, even during an outage.

AD

There are also liability consequences. If a fire or injury is traced to an illegal backfeed cord, your homeowner’s insurance may deny a claim. If a utility worker is injured by power fed onto the grid, you could face serious legal exposure. The financial and human costs far outweigh any short-term benefit.

Safe Alternatives and Proper Power Solutions

If you need to power part of your home during an outage, the safe solution is a generator inlet box paired with a transfer switch or an approved interlock kit. These devices physically prevent utility power and generator power from being connected at the same time. They also keep live voltage away from exposed prongs and utility lines.

For connecting devices directly to a generator, use heavy-duty extension cords with one male plug and one female connector. Match the cord’s wire gauge to the load and distance, and keep the generator outdoors away from windows, doors, and vents. Never run a generator inside a garage, basement, or enclosed space because of carbon monoxide risks.

Generator Inlet Boxes and Transfer Switches

A generator inlet box is a weatherproof receptacle mounted outside the home. It connects to a transfer switch or interlock kit inside the electrical panel. A proper generator cord plugs into the inlet box with a female connector, while the other end plugs into the generator with a male plug. This design is intentionally different from a suicide cord.

Manual transfer switches let you select which circuits receive generator power. Interlock kits prevent the main breaker and generator breaker from being on at the same time. Both options require professional installation and a permit in many jurisdictions. The cost is modest compared with the safety and code compliance they provide.

Correct Extension Cords and Adapters

A normal extension cord should always have one male end and one female end. Choose a cord with a sufficient amperage rating, a grounding plug, and a jacket designed for indoor or outdoor use as needed. For heavy loads such as heaters, table saws, or RV appliances, use a short, thick-gauge cord to reduce voltage drop and overheating.

Listed adapters exist for specific purposes, such as connecting a generator to an RV or a welder to a dedicated outlet. These adapters are engineered and tested for their intended use, and they maintain the male-to-female safety principle. If you cannot find a listed adapter for your situation, an electrician can design a safe solution rather than improvising with a double male cord.

How to Stay Safe and What to Do If You Find One

Inspect every extension cord before use. Look for cracked insulation, missing ground pins, bent prongs, or signs of heat damage. If a cord has two male ends, do not plug it in, do not test it, and do not keep it in a toolbox where someone might mistake it for a normal cord.

If you find a male-to-male cord in a home, garage, or job site, treat it as a hazardous item. The safest move is to disable it so no one can use it, then replace it with the correct cord or a proper power-transfer solution. If someone you know uses one for generator backfeeding, explain the danger and help them contact a licensed electrician.

Identifying Dangerous DIY Cords

A dangerous DIY cord often looks like a standard extension cord until you examine the ends. If both ends have prongs, it is a male-to-male cord. If the cord has no molded strain relief, no markings, or a homemade appearance, it may also lack the insulation and gauge needed for safe use.

Labels matter. Reputable cords carry markings such as UL, ETL, or CSA, along with a wire gauge like 16/3, 14/3, 12/3, or 10/3. A cord without listing marks or with vague specifications should not be used for any high-power application. When in doubt, discard it and buy a listed replacement.

Proper Disposal and Replacement

To dispose of a two male end cord, cut both male ends off so it cannot be reused as a suicide cord. Then recycle the copper and plastic through an appropriate electronics or metal recycling program. Do not donate it, sell it at a garage sale, or leave it in a scrap pile where someone might repair it.

Replace it with equipment designed for the job. For generator power, use a transfer switch and inlet box. For temporary power, use outdoor-rated extension cords with the correct male and female ends. For specialized testing, use fused test leads and isolation equipment intended for electrical work. The right tool costs less than a hospital visit or a fire recovery.

If you are considering a two male end cord for backup power, testing, or any other purpose, stop and choose a listed solution designed for that job. A licensed electrician can help you install a safe generator inlet, transfer switch, or interlock kit, and you can protect both your property and the people who work on the power lines. The right cord, used the right way, is always the better choice.

AD