everbilt trip lever bath drain installation

Everbilt Trip Lever Bath Drain Installation: Easy Step-by-Step Guide

By Joseph Smith
AD

Installing an Everbilt trip lever bath drain can transform a tired tub into a reliable, smooth-operating fixture, but the job demands patience and attention to detail. Whether you are replacing a corroded drain assembly or finishing a bathroom remodel, understanding how the trip lever system works will help you avoid leaks, misaligned linkages, and mysterious clogs. This guide walks you through the entire Everbilt trip lever bath drain installation process, from identifying the parts in the kit to testing the final connection.

Unlike a simple pop-up stopper, a trip lever drain uses an overflow plate, a linkage rod, and a plunger inside the drain shoe to control water flow. That mechanical connection is what makes installation a bit more involved. The good news is that with basic plumbing tools, a clean workspace, and a logical sequence, most homeowners can complete the project in a few hours and gain confidence for future bathroom upgrades.

Understanding the Everbilt Trip Lever Bath Drain System

The Everbilt trip lever bath drain is a complete assembly designed to replace the drain and overflow components on a standard bathtub. It typically includes a strainer, drain shoe, overflow elbow, overflow plate with lever, plunger, linkage rod, and rubber or silicone gaskets. Each piece plays a role in sealing water, controlling the stopper, and directing wastewater to the drain line.

AD
How To Adjust Bath Tub Drain - Trip Lever Drain
How To Adjust Bath Tub Drain - Trip Lever Drain
Wholesale Maintenance Supply Bathtub Drain Trip Lever Bath Waste Conversion Kit, Brushed Nickel Finish - Fits Drain Opening 1-3/8" to 1-1/2
Wholesale Maintenance Supply Bathtub Drain Trip Lever Bath Waste Conversion Kit, Brushed Nickel Finish - Fits Drain Opening 1-3/8" to 1-1/2
1-Piece Tub Drain Linkage Assembly with Trip Lever and Strainer for Bathtub Waste Overflow Drain Replacement in Silver
1-Piece Tub Drain Linkage Assembly with Trip Lever and Strainer for Bathtub Waste Overflow Drain Replacement in Silver

Because the trip lever mechanism relies on precise alignment, the installation is not just about tightening nuts. The linkage must move freely, the plunger must seat correctly, and the overflow plate must sit flush against the tub. If any of these elements are off, the drain may leak, the stopper may not hold water, or the lever may feel stiff or unresponsive.

Key Components of an Everbilt Trip Lever Drain Kit

The main body of the kit is the drain shoe, which connects to the tub's waste opening and holds the plunger. The strainer sits inside the tub and threads or screws into the shoe, while the overflow elbow attaches behind the overflow opening. The overflow plate covers that opening and houses the lever that controls the plunger through a metal linkage rod.

Bathtub Drain Linkage Replacement With Trip Lever Linkage Polished Chrome | Tub
Bathtub Drain Linkage Replacement With Trip Lever Linkage Polished Chrome | Tub
Universal Bath Tub Drain Linkage Assembly with Trip Lever and Strainer, Chrome Bathtub Drain Kit, Fit for Trip Lever Waste and Overflow Draining
Universal Bath Tub Drain Linkage Assembly with Trip Lever and Strainer, Chrome Bathtub Drain Kit, Fit for Trip Lever Waste and Overflow Draining
Enhon Universal Bath Tub Drain Linkage Assembly Trip Lever And Strainer Done
Enhon Universal Bath Tub Drain Linkage Assembly Trip Lever And Strainer Done

Gaskets and seals are small but critical. A rubber gasket usually sits between the tub and the drain shoe, and another seal protects the overflow plate connection. Some Everbilt kits also include a friction ring or locknut to secure the shoe from below. Before installation, lay out every part and compare it to the instructions so you do not accidentally discard a needed washer or clip.

How the Trip Lever Mechanism Operates

When you flip the lever on the overflow plate, it pivots a rocker arm inside the overflow tube. That arm pulls or pushes the linkage rod, which in turn raises or lowers the plunger inside the drain shoe. In the down position, the plunger seals against the drain opening so the tub can hold water; in the up position, it lifts away and allows water to flow out.

AD

This design is simple, but it depends on the linkage being adjusted to the correct length. If the rod is too long, the plunger may not lift high enough. If it is too short, the plunger may not seal. During Everbilt trip lever bath drain installation, you will usually need to thread the rod in or out and then test the lever several times before making a final cut or tightening the locknut.

Enhon Universal Bath Tub Drain Linkage Assembly Trip Lever And Strainer Done
Enhon Universal Bath Tub Drain Linkage Assembly Trip Lever And Strainer Done
Trip Lever 1-1/2 in. 20-Gauge Brass Tubular Bath Waste and Overflow Drain, Fits Gerber, in Matte Black
Trip Lever 1-1/2 in. 20-Gauge Brass Tubular Bath Waste and Overflow Drain, Fits Gerber, in Matte Black
Fine Fixtures Ff-5114-sb Tub Drain Overflow Trip Lever Kit Satin Brass 1-1/2in
Fine Fixtures Ff-5114-sb Tub Drain Overflow Trip Lever Kit Satin Brass 1-1/2in
Keeney Rough Brass Trip Lever Bath Drain with Polished Chrome Trim
Keeney Rough Brass Trip Lever Bath Drain with Polished Chrome Trim
EZ-FLO Trip Lever Chrome Plated Brass Bath Drain Assembly with Drain Washer, 1-1/2 Inch x 11.5 Coarse Thread, 35269
EZ-FLO Trip Lever Chrome Plated Brass Bath Drain Assembly with Drain Washer, 1-1/2 Inch x 11.5 Coarse Thread, 35269
Fine Fixtures Bathtub Shower Drain - 20 Gauge Brass Tubing, Trip Lever Overfl...
Fine Fixtures Bathtub Shower Drain - 20 Gauge Brass Tubing, Trip Lever Overfl...

Step-by-Step Everbilt Trip Lever Bath Drain Installation

Before you begin, gather the tools you will need: an adjustable wrench, pliers, a screwdriver, plumber's putty or silicone sealant, a bucket, rags, and a flashlight. If your tub has an access panel, clear it so you can reach the drain shoe and overflow connection from behind. If there is no access panel, you may need to create one or work through the overflow opening, which is more difficult.

Always turn off the water supply and drain the tub completely before disassembly. Place a bucket under the drain shoe to catch residual water, and wear gloves to protect your hands from sharp edges and old sealant. The following steps assume you are replacing an existing drain, but the same principles apply when installing a new Everbilt kit on a rough-in tub.

AD

Preparing the Tub and Removing the Old Drain

Start by removing the overflow plate. It is usually held by one or two screws. Once the plate is loose, pull it gently away from the tub and disconnect the linkage rod from the rocker arm or plunger. Then remove the strainer from the tub drain. Some strainers unscrew, while others are held by a large locknut underneath; in that case, you will need to access the drain shoe from below.

With the strainer removed, unscrew the drain shoe from the waste pipe. If the connection is corroded, apply penetrating oil and let it sit before trying again. Once the old assembly is out, clean the tub opening and the waste pipe threads. Inspect the pipe for cracks or cross-threading, and remove any old putty, silicone, or rubber debris so the new gaskets can seal properly.

Installing the New Everbilt Drain, Adjusting the Linkage, and Leak Testing

Apply a ring of plumber's putty or silicone sealant around the underside of the new strainer flange, then insert it into the tub drain opening. From below, place the rubber gasket over the drain shoe and thread the shoe onto the waste pipe. Tighten it firmly with a wrench, but do not overtighten, as that can crack the tub or distort the gasket. Next, install the overflow elbow and gasket behind the overflow opening, then attach the overflow plate with its lever and rocker arm.

AD

Connect the linkage rod to the rocker arm and thread it into the plunger assembly. Slide the plunger into the drain shoe and adjust the rod length until the lever moves smoothly and the plunger seals the drain when the lever is down. Fill the tub with a few inches of water, let it sit, and check for leaks around the strainer and overflow plate. Then drain the tub and watch the linkage move through its full range. If water drips from the waste pipe or the stopper fails to hold, readjust the rod or reseat the gaskets before closing up the access panel.

A successful Everbilt trip lever bath drain installation comes down to clean connections, correct gasket placement, and a linkage that moves freely without binding. Take a few extra minutes to test the stopper and inspect every joint, and you will avoid the frustration of a leak behind the tub later. With the drain working smoothly, your bathroom is one step closer to being fully functional and ready for daily use.

AD