Everbilt Adjustable Closet Rod Installation Guide
Installing an adjustable closet rod is a simple home improvement project that can greatly increase the functionality of your closet space. The Everbilt adjustable closet rod allows you to customize the height of your rods to accommodate various clothing types and optimize your closet organization. This comprehensive guide will walk you through the steps on how to install an Everbilt adjustable closet rod, ensuring a secure and efficient process.
Before you start, make sure you have gathered all the necessary tools and materials. You will need a drill, a screwdriver (depending on the model of your rod), a measuring tape, a level, and, of course, your Everbilt adjustable closet rod. It's also a good idea to have a helper to assist with measurements, holding parts in place, and heavy lifting if necessary.
Understanding the Everbilt Adjustable Closet Rod Kit
The Everbilt adjustable closet rod kit comes with all the components you need for a successful installation. Familiarize yourself with the parts, which typically include:



- Two rod segments
- Two end supports
- Two middle supports (depending on the length of your rod)
- Mounting screws
- Wall anchor screws (if needed)
- Instruction manual
Each part plays a crucial role in the installation process, so ensure you have all of them before beginning.
Measuring for Installation
Accurate measurement is crucial for a successful installation. Here's how to measure your closet space:



- Measure the width of your closet from wall to wall, and note down the measurement.
- Measure the height of the space where you want to install the rod. Ensure you consider the ceiling height to avoid any obstructions.
- Determine the desired height of your rod. The Everbilt adjustable rod allows for a range of heights, typically between 72" to 97".
Once you have your measurements, you can proceed with marking the wall for drilling.
Gathering Tools & Materials
Besides the Everbilt adjustable rod kit, you'll need the following tools:
- A drill with appropriate bits for drywall or wood (depending on your closet's construction)
- A screwdriver (if your kit uses one instead of a drill)
- A level to ensure straight installation
- A measuring tape and pencil for marking
- Wall anchors, if needed (expansion bolts, molly bolts, etc.)
Having all the necessary tools and parts on hand will streamline your installation process.






Installing the Everbilt Adjustable Closet Rod
With your measurements and tools ready, you can now move on to installing your adjustable closet rod.
Marking & Drilling Mounting Holes
Using your measurements, mark the top and bottom holes for each of the end supports. Ensure the marks are level and evenly spaced:
- Mark the needed holes on the wall considering the desired rod height and the length of the rod (end supports will be placed at both ends).
- Use a level to ensure your marks are straight.
- Drill holes into the wall at the marked points. If you're drilling into drywall, consider using wall anchors for added support.
Being precise with your marking and drilling is essential for a smooth rod installation.

Assembling the Rod
Before attaching the rod to the wall, it's a good idea to assemble it first:
- Insert the adjustment pin into one of the rod segments and slide the two segments together, creating a single rod.
- zcae Nate the end supports' mounting screws into the predrilled holes in the wall.
- Slide the assembled rod onto the end supports, ensuring the rod overlaps the supports.
With the rod assembled and secured, you can now adjust its height as needed.
The Everbilt adjustable closet rod is a versatile storage solution that can save you time, space, and money in the long run. By following this guide and taking your time with each step, you can ensure a successful and lasting installation. Once complete, sit back and admire your upgraded closet space!




