Master Easy Death Metal Drums
Embarking on a journey into the realms of extreme music, specifically death metal, might seem daunting, es pecially when it comes to drumming. The relentless speed, complex rhythms, and heavy hitters may appear intimidating, but fear not, aspiring drummer! With the right approach, understanding, and practice, mastering easy death metal drums is definitely within your grasp.
Death metal drumming, much like its guitar and vocal counterparts, is characterized by its heavy, fast, and aggressive style. However, contrary to popular belief, not all death metal drumming patterns are complex and require years of practice to master. Today, we'll explore easy death metal drumming techniques and patterns that can help you start your journey into this intense musical territory.
Understanding Basic Death Metal Drumming Concepts
Before delving into practical patterns, it's crucial to grasp some fundamental concepts in death metal drumming. Understanding these will form a solid foundation upon which you can build your skills:



Tempo: Death metal songs typically range from 120 to 220 beats per minute (BPM). As a beginner, focus on the lower-to-mid range to build your speed gradually.
Drum Tuning and Equipment
Unlike some genres, death metal drums require a specific tuning for that characteristic heavy, low-end sound. Tune your toms to a low tuning (around 4-5 on a standard drum tuning gauge) and your bass drum to around 2-3. This will provide the deep, full tone needed for death metal.



As for equipment, invest in a good set of heads (preferably double-ply for durability) and dampen your drums with towels or moon gels to control ringing and achieve that tight, heavy sound.
Drum Setup
Most death metal drummers use a standard four-piece kit (bass drum, snare, two toms, and a crash/ride cymbal) with a doble bass pedal. Some may also use an additional cymbal or tom, but as a beginner, stick to the basics to avoid overwhelming yourself.
Mount your toms close together and relatively low to maximize your reach and playability. Your hi-hat should be positioned comfortably so you can easily switch between hi-hat, ride, and crash cymes.






Learning Easy Death Metal Drum Fills and Beats
Now that you've established the right foundation, let's dive into some essential death metal drum fills and beats that you can start practicing today.
Remember, the key is to start slow and gradually build your speed as you become more comfortable with the patterns. Consistency is crucial; strive for accuracy over speed initially.
Basic Eighth-Note Beats
Death metal drumming is heavily based on eighth-note and sixteenth-note beats. Start with a simple eighth-note hi-hat pattern (e.g., "RLRL" for right- left-right-left) and play quarter notes on the bass drum. This pattern is widely used in many genres, so it's an excellent starting point.

To add variety, experiment with different rhythms on your hi-hat, such as "RRRL" or "LLRR." You can also incorporate your snare or toms into the pattern, playing eighth notes while maintaining the bass drum quarter notes.
The Blast Beat
Arguably one of the most recognizable death metal drum patterns, the blast beat is essentially a rapid, steady stream of notes played on the snare or bass drum with the hi-hat providing the rhythm.
Start by practicing two to four hits on the snare or bass drum followed by a hi-hat hit. Gradually build up to longer sequences, such as eight or sixteen hits, and eventually, a full sixteen counts. Focus on maintaining speed and accuracy, rather than power.
Premiere Simple Death Metal Drumming Techniques
As you master the basic patterns, incorporate these easy death metal drum techniques to add variations to your playing and enhance your overall skill:
D Advisory note: While these techniques are relatively simple, they may still require some practice to master, so be patient with yourself.
Syncopation
Syncopation involves temporarily delaying a note to emphasize the next one. In death metal, this often occurs in hi-hat patterns. For instance, a typical "RLRL" pattern can be syncopated to "RLR'appractice, these techniques to develop your skills and add depth to your playing.
amping
palm muting is a technique where you mute the strings of your guitar while strumming to create a heavier, more agg allive tone. In death metal drumming, the equivalent is temporarily dampening your toms for a change in sound.
To achieve this, place a small towel or dampening device onto your tom as you play a fill or beat. The sound will be heavier and 'damped,' providing a unique punctuation to your playing. Experiment with different levels of dampening and different toms to find the sound that suits your style.
Applying Easy Death Metal Drums to Songs
With a solid foundation of basic patterns and techniques under your belt, it's time to apply what you've learned to actual death metal songs. Start with some beginner-friendly tracks to build your confidence and gradually take on more challenging pieces:
Some recommended tracks for beginner death metallers include:
- Metallica - "Hit the Lights"
- Annihilator - "I Am Alive"
- Slayer - "Angel of Death"
- Pantera - "Walk With Me in Hell"
- Kreator - "Flag of Hate"
As you improve, check out more challenging songs from bands like Necrophagist, Suffocation, or Cannibal Corpse for an authentic death metal drumming experience.
Finally, remember that mastering death metal drums is a journey that requires dedication, patience, and a lot of practice. Embrace the process and celebrate each small victory along the way. Who knows? One day, you might just find yourself behind the kit for your favorite local death metal band. Until then, keep playing, keep improving, and most importantly, have fun!





