Drill Bit Index Chart: The Ultimate Size Guide for Every Drill Project
If you have ever stared at a drawer of loose drill bits and wondered which one is 3/16 inch, which is a #29, and which is close enough for a 5 mm screw, a drill bit index chart is the reference you need. It turns a confusing pile of metal into an organized system of sizes, decimal equivalents, and practical applications.
More than a wall poster or a label inside a drill index case, this chart connects fractional, wire gauge, letter, and metric sizes so you can choose the right bit with confidence. Whether you are tapping threads, drilling clearance holes for bolts, or building a furniture jig, understanding the chart prevents wasted time and ruined workpieces.
What Is a Drill Bit Index Chart?
A drill bit index chart is a structured table or printed layout that lists drill bit sizes and often includes decimal equivalents, metric conversions, and recommended uses. The word "index" refers to the organized sequence of sizes, not a single brand or standard. You will find these charts on metal drill indexes, laminated shop cards, mobile apps, and downloadable PDFs.
At its core, the chart answers two questions: what size is this bit, and what size do I need? It may show only diameters, or it may combine tap drill sizes, clearance drill sizes, and wire gauge numbers. That extra information makes it a daily tool for machinists, electricians, woodworkers, and DIY enthusiasts who need fast, reliable size identification.
Common Measurement Systems
Most drill bit index charts include at least one of four measurement systems. Fractional inch bits are labeled in fractions such as 1/16, 1/8, and 1/4. Numbered wire gauge bits run from #80 through #1 and are common for small precision holes. Letter bits use letters A through Z for sizes that fall between fractional and metric options. Metric bits are measured in millimeters, usually in 0.5 mm increments.
Because these systems overlap, a chart is essential for conversion. For example, a 1/4 inch bit measures 0.2500 inches, while a 6.5 mm bit measures 0.2559 inches. They are close, but not identical. A drill bit index chart makes those differences visible before you drill, which is critical when tolerance matters.
Reading the Chart Columns and Labels
A typical drill bit index chart includes columns for the nominal size, decimal inch equivalent, metric equivalent, and sometimes a tap drill or clearance recommendation. Rows are sorted from smallest to largest so you can scan quickly. On a physical drill index, the same information is printed next to each labeled hole.
Pay attention to whether the chart lists the drill diameter, the shank diameter, or both. For most bits above 1/8 inch, the shank and cutting diameter match. For small wire gauge bits, the shank may be larger than the cutting end, so do not measure the shank and assume it is the bit size. Always verify the fluted cutting diameter or the printed size on the bit itself.
How to Use a Drill Bit Index Chart Effectively
Start with the finished hole requirement. Identify the bolt, screw, dowel, or tap that will go into the hole, then look up the recommended drill size. If the chart offers multiple options, choose based on the fit you need: tight, close, or free. Also consider the material because hard metals may require slightly different pilot sizes than softwoods or plastics.
Next, plan your drilling sequence. For large holes, do not jump straight to the final size. Use a small pilot bit, then step up through intermediate sizes. A drill bit index chart helps you choose those steps so the final bit removes less material and stays cooler. This approach also extends bit life and improves hole accuracy.
Step-by-Step Size Selection
Using a chart is a repeatable process. First, measure or identify the target size. Second, find that size in the chart and note its decimal equivalent. Third, check the recommended tap drill or clearance drill if applicable. Fourth, confirm that you have the bit in the correct measurement system or a close equivalent.
As a practical example, imagine you need a clearance hole for a 1/4 inch bolt. A chart might list 1/4 inch as the bolt size, then recommend a 9/32 inch or 5/16 inch clearance drill depending on fit. For tapping, a 1/4-20 tap requires a #7 drill bit, not a 1/4 inch bit. A drill bit index chart with tap drill data eliminates that guesswork and helps you drill the correct pilot hole the first time.
Converting Sizes and Avoiding Common Mistakes
Conversion is straightforward once you know the decimal equivalent. To convert a fraction to a decimal, divide the top number by the bottom number. For example, 3/16 becomes 0.1875. To convert millimeters to inches, divide the millimeter value by 25.4. To convert inches to millimeters, multiply by 25.4. A drill bit index chart saves you from doing this math repeatedly and shows when two sizes are close but not interchangeable.
Common mistakes include confusing size with shank diameter, using an outdated chart, and ignoring material or coating differences. High-speed steel, cobalt, and carbide bits can perform very differently even at the same diameter. Use the chart for size, then consult the manufacturer for speed, feed, and coolant recommendations. For precision work, always verify with calipers or a micrometer rather than relying on a worn label or a rounded conversion.
Keep your drill bit index chart where you can see it, whether that is a laminated card above the bench or a searchable app on your phone. The next time a project calls for a specific hole size, let the chart guide your hand, and you will drill with more confidence, fewer mistakes, and better results.