Double 24 Inch Door Rough Opening: Size Guide & Installation Tips
A double 24 inch door rough opening refers to a construction specification where two doors are installed side by side, each requiring a rough opening size of 24 inches. This design is commonly used forיץlarge entryways, Closets, and overlaying two single door openings for convenient access and aesthetic appeal. The term "rough opening" signifies the total space allocated on the wall for installing the doors, including the space between the two doors, which is usually around 1.5 inches.
Understanding and correctly measuring for this type of door opening is crucial for accurate planning and seamless installation. This article provides a comprehensive guide, ensuring you're well-informed about the critical aspects, measurements, and careful considerations to make when working with a double 24 inch door rough opening.
Understanding Double Door measurements
Before delving into the specifics, it's essential to grasp the fundamental difference between single and double door measurements. Whereas single doors are measured door width x height, double doors are measured in pairs, meaning you'll need to calculate the width of both doors together plus the space in between.



That said, let's break down the measurement further:
Height and Width Measurements
Height is universally the same for single and double doors, referring to the vertical distance from the top of the door to the floor. For example, if your door is 36 inches tall, the height will still be 36 inches, regardless of a single or double door.



The width of a double door, however, applies to a pair of doors. Thus, for a double 24 inch door rough opening, the total width for both doors together would be 48 inches (24 + 24).
Space Between Jambs
The space between the jambs (or door frames) is typically around 1.5 inches but can slightly vary depending on the width of the stile (the vertical piece of the door frame). This spacing is crucial as it provides room for the latch to engage when the door is closed and allows for minor adjustments during installation.
Considering this space, the rough opening for a double 24 inch door rough opening would ideally be 48 inches (door width) + 1.5 inches (space between jambs) = 49.5 inches. However, it's advisable to leave around 1/8 to 1/4 inch of extra space for finished materials and adjustments, making the total rough opening size approximately 50.5 inches.






Important Considerations
When planning for a double 24 inch door rough opening, several factors require careful attention to ensure a successful outcome:
Door Styles and Types
Consider the style and type of doors you want. Are you going for solid wood, hollow core, or glass doors? Do they swing inwards or outwards? Each variation can influence measurements, so consult with professionals to avoid any pitfalls.
Moreover, ensure the door's swung will not interfere with other room features, such as furniture, windows, or appliances.

Wall Stud Placement
Wall studs should be placed 16 or 24 inches on-center, depending on your construction type. Therefore, ensure these landmarks align with your double 24 inch door rough opening measurements to simplify securing the door jambs to the framing.
If studs are not appropriately placed, you may need to install blocking, which adds to the project's complexity and cost.
In closing, working with a double 24 inch door rough opening requires meticulous planning and precision. However, with a firm understanding of measurements and careful consideration of other factors, you'll enjoy the beauty and functionality of your double doors for years to come. Don't hesitate to reach out to professional contractors if you're unsure about any aspect of the installation process.




