DIY Wooden Laundry Hamper with Lid
Transform your laundry routine into an organized charm with a DIY Wooden Laundry Hamper featuring a built-in lid. Not only does this stylish piece provide a practical solution for managing dirty clothes, but it also elevates your space with a touch of rustic elegance. Let's dive into creating this functional masterpiece that blends perfectly with your home decor.
Before we commence, bear in mind that this project requires intermediate woodworking skills and basic tools such as a miter saw, drill, tape measure, and sandpaper. Additionally, safety gear like goggles and work gloves is a must. Now, let's break down the steps and material list to get you started.
Gather Materials and Tools
Before you dive into the construction, ensure you have all the necessary materials and tools at hand:



- 2 Cedar boards (1x12, 7' long)
- 1 Sheet of 1/4" plywood
- 1 1/4" Pocket hole screws
- 1 1/4" Brad nails
- 2 Cabinet hinges
- Wood glue
- Finishing nails
- Paint, stain, or sealant of your choice
With your materials sorted, let's dive into the building process.
Measure and Cut the Boards
Begin by measuring and cutting your cedar boards. You'll need two pieces measuring 15" x 12", two pieces measuring 12" x 12", and two pieces measuring 2" x 12" for the lid support. Ensure you have a clean, safe workspace and use your miter saw for precision cuts.



Lay out your cuts to maintain wood grain alignment, and mark each piece with a pencil to avoid confusion during assembly.
Assemble the Base and Sides
Using a pocket hole jig, create pocket holes on the inside edges of two of your 15" x 12" and both 12" x 12" pieces. These will be your base and sides.
Apply wood glue along the joined edges, align the pieces, and secure them together using the 1 1/4" pocket hole screws. Ensure your sides are perpendicular to the base for a sturdy hamper.






Create the Lid and Support
For the lid, use your 1/4" plywood sheet to create a smooth, sturdy surface. Cut two pieces measuring 15" x 12". Be sure to keep these cuts on the grain to create a continuous pattern across your lid.
Attach the 2" x 12" lid supports to the underside of the lids using wood glue and brad nails. Position these supports 3" from the top to ensure clearance for the hinges. Make sure the supports are parallel to maintain balance when using the lid.
Attach the Hinges and Install the Lid
Mark the hinge placement on both the assembled hamper and the lid support. Ensure the hinges are level and centered, then attach them using screws. Position the lid on the hamper and ensure it opens and closes smoothly, with a tight fit.

Don't forget to consider the handle placement for your lid. You can create a simple handle from a leftover 1x2 cedar piece or use decorative hinges with built-in handles.
Sanding and Finishing
Sand your hamper, focusing on rounded edges and any rough spots. Start with 120-grit sandpaper and finish with 220-grit for a smooth surface. Wipe away any dust with a damp cloth.
Now's the time to apply your chosen finish - paint, stain, or sealant. Ensure you're in a well-ventilated area and follow the manufacturer's instructions for the best application technique. Allow ample drying time between coats for optimal results.
Stand back and admire your beautiful, functional DIY Wooden Laundry Hamper with Lid. This charming addition will not only simplify your laundry routine but also bring a touch of warmth and rustic elegance to your space. Happy organizing!





