DIY Witch's Hat Door Hanging
Halloween is just around the corner, and what better way to get into the spirit than by crafting your own DIY Witch's Hat Door Hanging? Not only is this a fun and creative project, but it's also a great way to make your home stand out in the neighborhood. So, let's grab our supplies and dive into this exciting craft!
Before we start, here are some supplies you'll need: a black felt hat, a large black felt circle for the base, a white felt triangle for the buckle, a long piece of white felt strip for the hat band, a narrow, 12-inch piece of black velvet ribbon, a hot glue gun and glue sticks, scissors, and a pencil. Once you've gathered all your materials, let's begin!
The first step is to create the brim of the hat. To do this, lay the black felt circle flat and trace a smaller circle in the center using your pencil. This will be the hole for the hat. Cut out both circles and discard the smaller one.
Now, let's create the hat band.Measure a 2-inch-wide strip along the bottom edge of the felt hat. Cut this strip off and set it aside. We'll use this as the brim extension later. Next, cut a 1-inch-wide strip along the bottom edge of the long white felt strip. This will be the hat band.
Adding the Hat Band
To attach the hat band, apply a line of hot glue along the bottom edge of the felt hat, just above where the brim meets the body of the hat. Carefully place the hat band over the glue, pressing it firmly in place. Allow the glue to cool and set.
Next, cut the 2-inch-wide strip you cut earlier into two 1-inch-wide strips. These will serve as the brim extension. Apply a line of hot glue along the inner edge of the brim and attach one of the strips. Repeat with the other strip, ensuring the ends overlap slightly. This will create a seamless look.
Creating the Buckle
Now it's time to make the buckle. Fold the white felt triangle in half, with the two pointed ends facing outwards. Apply a line of hot glue along the straight edge, then carefully press it onto the front of the hat, about 2 inches above the brim. Once the glue has set, you can carefully trim any excess felt off the back of the buckle.
To give the buckle some dimension, cut a small, thin rectangle from the remaining white felt. Apply glue to the back of the rectangle and attach it to the center of the buckle, creating a looped effect. This will also give you something to hang your witch's hat from.
Attaching the Ribbon
The final step is to add the velvet ribbon, which will act as the hat's hanger. Cut two 6-inch-long pieces of ribbon. Apply a line of hot glue to one end of each ribbon, then attach them to the underside of the buckle, positioning them so that they sit about 2 inches apart from each other. Allow the glue to cool and set.
Finally, test your hanger by placing the witch's hat over your doorway. If everything fits well, you're ready to hang it up and show it off!
Your DIY Witch's Hat Door Hanging is complete, and it's sure to be a hit with trick-or-treaters and passersby alike. So go ahead, embrace your inner witch, and enjoy the rest of this spooktacular season! And remember, crafting is always more fun with friends, so consider hosting a DIY craft night and creating more festive decorations together!


















